We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SFP+ to SFP+ passive twinax cable, 3.28 ft

Wiitek

Wiitek 10G SFP+ DAC Twinax Cable Red 3.28 ft

SKU CH-MYJE-MTZJ5

Red 10 Gbps passive SFP+ twinax cable, 3.28 ft, compatible with Cisco, Ubiquiti and other major brands

  • Connector ASFP+
  • Connector BSFP+
  • Length3.28 ft.
  • ColorRed
  • 10 Gbps throughput over a 3.28 ft passive twinax link
  • Red jacket colour simplifies cable identification in dense racks
  • SFP+ MSA and SFF-8432 compliance ensures broad switch compatibility
  • 30 AWG conductors support 10 GbE and 10 G Fibre Channel applications
  • Operates reliably from 0 to 70 °C (32 to 158 °F)

10 Gbps SFP+ Direct Attach Cable

This 3.28 ft passive twinax cable links two SFP+ ports at 10 Gbps. The red PVC jacket aids cable identification in dense racks. It operates from 0 to 70 °C and meets SFP+ MSA and SFF-8432 requirements. The 30 AWG conductors keep the assembly thin and flexible for tight patch panels.

Suits 10 GbE and 10 G Fibre Channel links

Network engineers building storage area networks, NAS clusters or switch-to-switch uplinks will find the length and compatibility list convenient. It is not for links that require active optics or longer reach than 3.28 ft. Buyers needing fibre media or extended distances should look at optical transceivers instead.

Passive 30 AWG twinax construction

The cable uses passive copper twinax with 30 AWG wires, so it draws no power and adds negligible latency. This construction limits the reach to the supplied 3.28 ft. Verify that your switch ports support passive DAC before ordering.

Highlights

  • 10 Gbps throughput over a 3.28 ft passive twinax link
  • Red jacket colour simplifies cable identification in dense racks
  • SFP+ MSA and SFF-8432 compliance ensures broad switch compatibility
  • 30 AWG conductors support 10 GbE and 10 G Fibre Channel applications
  • Operates reliably from 0 to 70 °C (32 to 158 °F)

Specifications

Connector ASFP+
Connector BSFP+
Length3.28 ft.
ColorRed

Questions about this item

What throughput will I actually see on a 10 Gbps link with this cable?

The cable is rated for 10 Gbps and will carry line-rate 10 Gigabit Ethernet or 10 G Fibre Channel traffic between two SFP+ ports.

Which standards govern the SFP+ interface on this cable and what do they limit?

It complies with SFP+ MSA and SFF-8432, which define the mechanical form factor, electrical pinout and 10 Gbps signalling limits for passive twinax assemblies.

How much clearance do I need for the 30 AWG twinax cable and its SFP+ ends?

The 30 AWG passive twinax is 3.28 ft long with a PVC jacket and standard SFP+ connectors that fit any SFP+ cage spaced for direct-attach copper.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.