We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pack of ten zinc-plated steel 90-degree grease fittings

Westward

Westward 52NZ48 Grease Fitting 90 Deg Steel 49/64 in 1/4-28 SAE PK10

SKU CH-5SZG-YFHWT

Pack of ten 90-degree steel grease fittings with 1/4-28 SAE threads and 6,000 psi rating

  • 90-degree angle reaches tight lubrication points easily
  • Steel body with zinc plating resists corrosion during use
  • SAE J-534-C compliance confirms automotive-grade reliability
  • 6,000 psi rating handles high-pressure grease systems
  • Pack of 10 fittings covers multiple maintenance jobs

Grease Fitting for Automotive Lubrication

The Westward 52NZ48 grease fitting is a steel component designed for standard lubrication points on automotive and industrial equipment. It uses a 1/4-28 SAE thread type for direct installation into compatible ports. The pack contains ten fittings for fleet or workshop use.

Capacity and Headroom for High-Pressure Service

Each fitting withstands a maximum pressure of 6,000 psi, providing headroom for heavy-duty grease guns and centralised systems. The 49/64 in overall length fits standard-depth cavities without protrusion. The 90.0 degree head angle allows access to fittings located on vertical or recessed surfaces where straight fittings cannot reach.

Upgrade from Worn or Straight Fittings

These fittings replace damaged, corroded or leaking units to restore a positive seal at the lubrication point. The zinc-plated finish resists corrosion longer than bare steel in wet or salt-exposed environments. The 90 degree angle upgrades straight fittings when hose clearance is limited. They do not suit metric-thread ports or applications exceeding the rated pressure.

Highlights

  • 90-degree angle reaches tight lubrication points easily
  • Steel body with zinc plating resists corrosion during use
  • SAE J-534-C compliance confirms automotive-grade reliability
  • 6,000 psi rating handles high-pressure grease systems
  • Pack of 10 fittings covers multiple maintenance jobs

Specifications

BrandWESTWARD

Questions about this item

Will the 1/4-28 SAE-LT thread on these 90-degree fittings match the existing ports on my older grease gun?

The fittings use a 1/4 in.-28 SAE-LT thread, which is the standard size for most grease guns and lubrication equipment, so they will thread directly into existing ports with the same specification.

How can I verify the 90-degree angle is seated correctly after installation?

After threading the fitting to the specified torque, the 90-degree head should sit flush against the mounting surface with the zinc-plated steel body fully engaged, allowing the grease coupler to lock on straight without binding.

Does the pack of 10 include any installation tools or thread sealant?

The package contains only the ten 90-degree steel grease fittings with zinc-plated finish; no installation tools, thread sealant, or additional hardware are included and must be sourced separately.

More in Pumps & Accessories

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.