We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Benchtop battery charger with 6 ft cables, grey metal case

Westward

Westward 1JYU9 Battery Charger 6 V 12 V 100 A Boost

SKU CH-TWRT-1EFPK

Benchtop charger maintains 6 V and 12 V lead-acid batteries with automatic 15 A charging and 100 A boost

  • Automatic boost, charge and maintain for 6 V and 12 V batteries
  • 100 A boost current delivers strong starting power
  • 15 A charging rate at both voltages restores capacity efficiently
  • 2 A maintenance mode keeps batteries ready during storage
  • 6 ft cables and benchtop design suit indoor workshop use

Benchtop Charger for 6 V and 12 V Batteries

This Westward benchtop unit charges AGM, deep-cycle and lead-acid batteries at 6 V or 12 V. It delivers a 100 A boost at 12 V for jump starting, a 15 A charge rate at both voltages and a 2 A maintenance mode. Automatic on/off control handles the cycle without user intervention.

Suits Workshops Needing Boost and Maintain

Technicians who need a single bench device for boosting, charging and long-term maintenance of 6 V and 12 V lead-based batteries will find the required modes here. Buyers who require a portable jump pack, a charger for lithium chemistries or a higher continuous charge current should look at other equipment.

100 A Boost Current at 12 V

The 100 A boost rating at 12 V is the decisive figure for starting vehicles with discharged batteries. If the application only needs charging or maintaining, the lower 15 A and 2 A rates apply, but the boost capability is what separates this unit from basic maintainers.

Highlights

  • Automatic boost, charge and maintain for 6 V and 12 V batteries
  • 100 A boost current delivers strong starting power
  • 15 A charging rate at both voltages restores capacity efficiently
  • 2 A maintenance mode keeps batteries ready during storage
  • 6 ft cables and benchtop design suit indoor workshop use

Specifications

BrandWESTWARD

Questions about this item

How do I connect the 6 ft cables to a 12 V battery for the 100 A boost without reversing polarity?

Attach the red clamp to the positive terminal and the black clamp to the negative terminal on the 12 V battery, then plug the unit into a 120 V AC outlet and select the boost function; the automatic charge type will manage the 100 A surge.

When should I expect the internal cooling fan or the 2.2 A input circuit to require service after repeated 15 A charging cycles?

The charger has no user-serviceable fan or fuse listed; keep the 6 ft cables and vents clean, and if the 15 A charge rate drops or the auto on/off function fails, have a qualified technician inspect the 120 V input stage.

At what point does the 100 A boost mode time out or overheat during a prolonged engine start attempt?

The automatic boost function monitors battery voltage and will reduce current or shut off if the 12 V battery reaches full charge or if internal temperature exceeds safe limits, protecting both the charger and the vehicle electrical system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.