Westward
Westward 13X054 Bearing Packer 1/2 to 5 In. fluid
A bearing packer with steel plates and a threaded post fits grease guns via an integrated nipple for 1/2 to 5 inch bearings
- Accommodates bearings from 1/2 to 5 inches
- Threaded post and steel plates ensure secure bearing alignment
- Grease fitting and included nipple allow direct gun connection
- Compact 3.9 in height fits tight workshop spaces
- California Prop 65 warning discloses chemical safety information
Purpose & User
The Westward 13X054 bearing packer is a workshop tool designed for mechanics and technicians who service bearings up to five inches in diameter. It mounts the bearing between steel plates on a threaded post and connects directly to a grease gun through the fitted grease fitting. The included grease nipple allows quick coupling so fresh lubricant can be forced through the bearing without removing the races from the housing.
Sizing Gate
This packer accepts bearings with an inner diameter of one half inch and an outer diameter up to five inches. The steel plates and threaded post are built to that specific range; bearings outside those limits will not seat correctly and cannot be lubricated with this tool. Check the bearing dimensions before ordering to ensure the packer matches the job.
Sustained Use
Under repeated shop cycles the steel construction resists deformation while the threaded post maintains clamping force on the bearing pack. The grease fitting and nipple stay sealed during continuous pumping so pressure builds evenly through the rollers rather than leaking at the connections. The tool ships new and carries a California Proposition 65 warning for chemicals known to cause cancer and birth defects or other reproductive harm.
Highlights
- Accommodates bearings from 1/2 to 5 inches
- Threaded post and steel plates ensure secure bearing alignment
- Grease fitting and included nipple allow direct gun connection
- Compact 3.9 in height fits tight workshop spaces
- California Prop 65 warning discloses chemical safety information
Specifications
| Brand | WESTWARD |
|---|
Questions about this item
How much bearing diameter can the packer handle on a real job?
The packer accepts bearings from 1/2 in. up to 5 in. diameter, so it covers most wheel and spindle bearings found in automotive and light industrial work.
What grease-gun connection does the packer use and what pressure limit does that impose?
A standard grease fitting on one end lets you attach any common grease gun; the fitting itself is the practical pressure limit, not the packer body.
What are the overall dimensions so I can check bench clearance?
The unit stands 3.9 in. tall and 2.9 in. wide, with steel plates and a threaded post that fit in a typical vise or press opening.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Westward
Westward 5NUE7 4-Jaw Hydraulic Coupler Ball Check 6000 PSI Pack of 5
$14.99
0.0001791BTC
In stock