We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two compact black PoE injector and splitter units with RJ45 and 5.5x2.1 mm DC connectors

Werleo

Werleo Passive PoE Injector Splitter Kit 5.5x2.1 mm DC Black 2 Pairs

SKU CH-AN75-YJGDD

Two passive PoE injector and splitter pairs deliver 12 V power over Ethernet up to 30 m for 10/100 Mbps devices

  • ColorBlack
  • Delivers power up to 30 metres over Ethernet cable
  • Compact 18.5 cm design fits tight installation spaces
  • Converts non-PoE devices to PoE with 5.5 × 2.1 mm plug
  • Supports 10/100 Mbps networks for cameras and access points
  • Includes two injector and splitter pairs for multiple endpoints

Passive PoE Injector and Splitter Kit

This kit provides two pairs of passive Power over Ethernet adapters that add PoE capability to non-PoE devices. It connects IP security cameras, wireless access points, routers, switches, and internet telephony equipment over standard Ethernet cabling. Each unit uses a 2.1 mm by 5.5 mm DC connector for power input and output.

Upgrades non-PoE network equipment

The injector and splitter transform standard 10/100 Mbps Ethernet ports into PoE-enabled connections without requiring a PoE switch. The jump is worth it when you need to power remote devices over existing CAT5, CAT5E, CAT6, or CAT7 cables up to 30 metres or 98 feet. An external power adapter is required to supply the system.

Handles 12 V DC at up to 1.5 A

The kit delivers a rated voltage of 12 V DC with a maximum rated current of 1.5 A, though 1.0 A is recommended for sustained long-term use. It comfortably runs compatible IP cameras and access points within the 30 metre distance limit. Performance drops beyond that range or if the connected load exceeds the current headroom.

Highlights

  • Delivers power up to 30 metres over Ethernet cable
  • Compact 18.5 cm design fits tight installation spaces
  • Converts non-PoE devices to PoE with 5.5 × 2.1 mm plug
  • Supports 10/100 Mbps networks for cameras and access points
  • Includes two injector and splitter pairs for multiple endpoints

Specifications

ColorBlack

Questions about this item

Will the 5.5 x 2.1 mm DC barrel connector on this kit fit my device's power input?

The injector and splitter both use a 5.5 mm outer by 2.1 mm inner barrel plug, a common size for 12 V security cameras and access points; check your device's jack before connecting.

How do I connect the injector and splitter with a Cat5e cable, and what mistake should I avoid?

Plug the injector's RJ45 male into your switch, run a Cat5e cable up to 30 m to the splitter's RJ45 female, then attach the splitter's DC plug to the camera; do not exceed 100 Mbps ports or the link will not negotiate.

How often should I replace the Ethernet patch cable used with this passive PoE kit?

The copper-core patch cable carries both 10/100 data and 12 V power; inspect it yearly for jacket damage or corroded pins, and replace it if continuity drops below 1.0 A under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.