We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red CAT6 solid shielded cable reel 1000 ft

WELTRON

WELTRON CAT6 Solid Shielded CMR 1000 ft Red 550 MHz

SKU CH-DZ12-KT8RX

Solid shielded Category 6 cable rated to 550 MHz, supplied as a 1000 ft pull box with bare-wire ends for structured wiring

  • TypeCategory 6
  • CatCategory 6
  • Connector A1 x Bare Wire
  • Connector B1 x Bare Wire
  • Length1000 ft.
  • ColorRed
  • Category 6 rated for 550 MHz bandwidth
  • 1000 ft solid shielded CMR for long runs
  • Bare-wire ends ready for custom termination
  • Red jacket simplifies cable identification
  • New condition ensures full performance life

Cable type and target installer

WELTRON Category 6 solid shielded cable comes in a 1000 ft red pull box with bare-wire ends on both sides. It is made for installers running permanent links through walls, ceilings or conduit where CMR-rated jacket is required by building code. The solid conductors keep attenuation low over long horizontal runs.

Who should choose it and who should not

This suits contractors and IT teams terminating patch panels, keystone jacks or wall plates in commercial or residential structured wiring. It does not suit anyone needing pre-terminated patch cords for rack-to-rack or desktop connections, nor installers who require plenum-rated CMP cable for air-handling spaces.

Deciding specification

The cable is rated to 550 MHz bandwidth, which is the single figure that determines whether the link will meet the performance margin your project specifies for Category 6 channels.

Highlights

  • Category 6 rated for 550 MHz bandwidth
  • 1000 ft solid shielded CMR for long runs
  • Bare-wire ends ready for custom termination
  • Red jacket simplifies cable identification
  • New condition ensures full performance life

Specifications

BrandWELTRON
TypeCategory 6
CatCategory 6
Connector A1 x Bare Wire
Connector B1 x Bare Wire
Length1000 ft.
ColorRed

Questions about this item

What conduit size fits a 1000 ft Cat6 solid shielded cable reel?

A 1000 ft Cat6 solid shielded reel typically requires at least a 1-inch conduit to accommodate the FTP jacket and pulling tension without exceeding fill ratios.

Which termination step is most often missed when installing solid shielded Cat6 cable?

The drain wire must be bonded to the shielded jack or patch panel ground lug; skipping this step leaves the FTP shield floating and defeats alien-crosstalk protection at 550 MHz.

When should the cable be re-certified after installation?

Re-test with a Cat6-qualified certifier after any re-termination, physical damage, or if the channel is moved to 10 GbE service, since solid conductors can develop micro-fractures over time.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.