We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 15 cm PCIe x4 riser cable with right-angle connector, metal shielding, five flat wires

weastlinks

weastlinks PCIe x4 extension cable R22SR 270° 15 cm

SKU CH-J9C2-K0C7H

A 15 cm PCIe 3.0 x4 riser with a 270° right-angle connector and EMI-shielded flat cables for full-speed 32 Gbps extension

  • PCIe 3.0 x4 full speed up to 32 Gbps
  • 270° inverted reverse angle fits tight spaces
  • 15 cm wire length keeps signal paths short
  • EMI shielding with five flat cables reduces interference
  • German-patented wire and Lotes connectors ensure stable transfer

PCIe x4 270° extender, 15 cm

The weastlinks R22SR is a PCIe 3.0 x4 riser cable that bends 270 degrees in a reverse direction. It measures 15 cm of wire between the two connectors and carries a maximum transfer rate of 32 Gbps. The assembly uses five flat wires with a metal shield to reduce electromagnetic interference. It is intended for capture cards, RAID SSDs, LAN adapters or USB expansion cards.

Builders fitting a card behind the motherboard

The inverted 270-degree angle lets a PCIe x4 card sit parallel to the board with the bracket facing the opposite way. This suits compact cases where a straight or 90-degree riser would foul the side panel or drive cage. Builders who need a straight exit, a 90-degree upright bend, an 180-degree vertical fold, or a longer cable run should consider a different riser model.

270-degree reverse bend

The defining characteristic is the 270-degree inverted angle of the R22SR variant, which determines whether the card clears surrounding components in a given chassis layout.

Highlights

  • PCIe 3.0 x4 full speed up to 32 Gbps
  • 270° inverted reverse angle fits tight spaces
  • 15 cm wire length keeps signal paths short
  • EMI shielding with five flat cables reduces interference
  • German-patented wire and Lotes connectors ensure stable transfer

Specifications

No published specifications for this item yet.

Questions about this item

Does my motherboard need a free PCIe x4 slot to use this 15 cm R22SR extender?

Yes, the cable connects a PCIe x4 device to an open PCIe x4 slot on the motherboard.

Will the 270° right-angle connector clear a graphics card sitting in the adjacent slot?

The inverted 270° design routes the cable downward, helping it fit beside tall expansion cards.

How can I verify the link is running at PCIe 3.0 x4 32G/bps after installation?

Check the negotiated link speed in Device Manager or GPU-Z; it should show PCIe 3.0 x4.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.