We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 15 cm PCIe 3.0 x4 ribbon cable with dual 90 degree right-angle connectors and metal shielding

weastlinks

weastlinks PCIe 3.0 x4 Riser Cable Dual 90° 15cm

SKU CH-1W25-GAFYE

A PCIe 3.0 x4 riser cable with dual 90° connectors and 15 cm length for flexible card placement

  • Dual 90° connectors fit tight spaces
  • 15 cm ribbon keeps builds tidy
  • PCIe 3.0 x4 delivers 8 Gbps bandwidth
  • Five flat wires with metal shield cut interference
  • Extends x4 slot without signal loss

PCIe 3.0 x4 Riser Cable 15cm

This PCIe 3.0 x4 riser cable extends a PCI Express x4 connection by 15 centimetres. Both ends feature a 90-degree right-angle connector for tight clearance. The ribbon design uses five flat conductors with a metal shield for EMI protection. It carries data at up to 8Gbps across the link.

Builders routing a card in a compact chassis

The dual right-angle ends help route the cable parallel to the motherboard or backplane where straight connectors would not fit. The 15cm length suits short runs inside small-form-factor cases or riser brackets. Builders who need a longer reach or a different connector orientation should look at something else.

Sustained 8Gbps throughput with shielding

The five flat conductors and metal shield maintain signal integrity under continuous load at the full PCIe 3.0 x4 rate. EMI shielding reduces interference from adjacent components during prolonged transfers. The short 15cm run minimises latency and signal loss compared with longer extenders.

Highlights

  • Dual 90° connectors fit tight spaces
  • 15 cm ribbon keeps builds tidy
  • PCIe 3.0 x4 delivers 8 Gbps bandwidth
  • Five flat wires with metal shield cut interference
  • Extends x4 slot without signal loss

Specifications

No published specifications for this item yet.

Questions about this item

Does my motherboard need a PCIe 3.0 x4 slot for this riser cable to work?

Yes, the cable connects a PCIe 3.0 x4 slot to a matching x4 device, so the board must provide that interface.

Will the dual 90-degree connectors fit next to a larger graphics card in the adjacent slot?

Both ends are right-angled, letting the ribbon run parallel to the board and clear tall neighbour cards.

How can I confirm the link is running at 8Gbps after installation?

Check the negotiated link speed in your OS device manager or BIOS; it should show PCIe 3.0 x4.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.