We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal enclosure with four M.2 SATA slots in a 3.5 inch form factor

weastlinks

weastlinks 4/5 Port M.2 SATA to 3.5" SATA 3.0 JBOD Adapter

SKU CH-JXRF-CJW9P

Mounts up to five M.2 SATA SSDs into one 3.5" SATA 3.0 JBOD volume at 6Gbps

  • Changer TypeM.2 SATA
  • Add M.2 SATA speed to any 3.5" SATA bay
  • Reach 6 Gbps throughput on a SATA III controller
  • Open frame design keeps drives cooler
  • Supports 2230 2242 2260 2280 M.2 SATA SSDs
  • Four or five drives combine into one JBOD volume

4/5 Port M.2 SATA JBOD Adapter

This adapter lets you install up to five M.2 SATA SSDs into a single 3.5 inch drive bay. It presents the drives as one combined JBOD volume to the host system. The enclosure suits builders who want to repurpose existing SATA SSDs without using multiple motherboard slots. It does not work with NVMe or PCIe M.2 drives.

Thermals and power

An open metal frame surrounds the SSDs to maximise passive heat dissipation during operation. SATA SSDs typically draw less power than mechanical hard drives, reducing overall system consumption. No active cooling is included, so airflow in the case should be adequate for sustained workloads. Noise remains at the level of the system fans alone.

SATA-only M.2 support

The adapter accepts only M.2 NGFF SATA SSDs in 2230, 2242, 2260 and 2280 lengths. NVMe and PCIe M.2 drives are not supported and will not function. All installed SSDs must be inserted simultaneously to form the JBOD array. First use requires drive initialisation, so back up data before installation.

Highlights

  • Add M.2 SATA speed to any 3.5" SATA bay
  • Reach 6 Gbps throughput on a SATA III controller
  • Open frame design keeps drives cooler
  • Supports 2230 2242 2260 2280 M.2 SATA SSDs
  • Four or five drives combine into one JBOD volume

Specifications

Changer TypeM.2 SATA

Questions about this item

How do I install the M.2 SATA SSDs into the 4/5 port JBOD adapter and what step is often missed?

Insert each M.2 SATA SSD (2230, 2242, 2260 or 2280) into the B+M key slots, secure with screws, connect the adapter to a 3.5" SATA 3.0 bay and power, then initialise the JBOD volume in your OS — the step often missed is that all four or five drives must be installed simultaneously for the adapter to function.

What maintenance will the weastlinks JBOD adapter need over time?

The open-frame metal case relies on passive cooling, so periodically remove dust from the drive slots and ensure chassis airflow remains unobstructed; no firmware updates or battery replacements are required for the adapter itself.

What limit appears first when the adapter runs sustained workloads?

The SATA 3.0 6 Gbps host link becomes the bottleneck before the individual M.2 SATA SSDs reach their own throughput ceilings.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.