We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Warrky WARRKY-AV-H03 HDMI switch 2x1 4K 60Hz 3.3ft fixed braided cable aluminum case 2K 144Hz HDCP 2.2

SKU CH-WM75-R2JK7

Bidirectional 2×1 HDMI switch with 3.3 ft fixed braided cable, 4K 60 Hz, 2K 144 Hz, HDCP 2.2 and 10.2 Gbps bandwidth in an aluminium case

  • TypeHDMI
  • Changer TypeHDMI(???????? ?????????????? ?????????????? ???? ?????? ????
  • Ports2
  • Cable Length3.3
  • Input Connector2
  • Output ConnectorFemale
  • Switch two sources on one display with a built-in 3.3ft cable
  • Toggle between two displays from a single source device
  • Supports 4K at 60Hz and 2K at 144Hz for smooth visuals
  • Aluminum case keeps the unit at 92°F after 12 hours use
  • Gold-plated connectors and 10.2Gbps bandwidth ensure clean signal

2-in-1 HDMI Switch with Fixed Braided Cable

The Warrky WARRKY-AV-H03 is a bidirectional HDMI switch that connects two sources to one display or one source to two displays. A 3.3 ft fixed braided cable is integrated, so no separate lead is needed for the primary connection. An aluminium shell dissipates heat and a capsule LED shows the active port. The unit measures 2.07 in by 1.77 in by 0.51 in and weighs 0.09 kg.

Replaces Separate Cables and Manual Swapping

This switch removes the need for three extra HDMI cables and the hassle of unplugging devices by hand. The jump is worth it when you regularly alternate between a console, streaming stick or PC on a single 4K 60 Hz screen, or when you toggle one source between two monitors or a TV and a projector. It also upgrades setups that previously relied on passive splitters which cannot handle HDCP 2.2 protected streams.

Fits Tight Spaces and Frees Up Ports

The slim 0.51 in profile and side groove let the switch sit behind a wall-mounted TV or inside a crowded media cabinet without blocking adjacent ports. Gold-plated connectors resist corrosion and the AWG26 HDMI 2.0 wire supports 10.2 Gbps bandwidth for 4K 60 Hz, 2K 144 Hz, HDR and 7.1 audio pass-through. The fixed cable eliminates loose-connection artefacts, freeing you from troubleshooting intermittent signal loss.

Highlights

  • Switch two sources on one display with a built-in 3.3ft cable
  • Toggle between two displays from a single source device
  • Supports 4K at 60Hz and 2K at 144Hz for smooth visuals
  • Aluminum case keeps the unit at 92°F after 12 hours use
  • Gold-plated connectors and 10.2Gbps bandwidth ensure clean signal

Specifications

BrandWarrky
ModelWARRKY-AV-H03
Part NumberWARRKY-AV-H03
TypeHDMI
Changer TypeHDMI(???????? ?????????????? ?????????????? ???? ?????? ?????????????? ???? ?? ????????)
Ports2
Cable Length3.3
Input Connector2
Output ConnectorFemale
Maximum Resolutions3.3ft / 1m
Dimensions2.07 in x 1.77 in x 0.51 in
Weight0.09 kilograms

Questions about this item

How much space does the 2.07 in x 1.77 in x 0.51 in aluminum case need behind my display?

The switch measures 2.07 inches wide, 1.77 inches deep and 0.51 inches thick, so allow at least that much clearance behind the TV or monitor plus room for the fixed 3.3 ft braided cable to bend without strain.

Which end of the fixed 3.3 ft cable plugs into the display and which ports take the two sources?

Connect the fixed HDMI plug to the single display, then attach both source devices to the two female HDMI ports on the switch; press the capsule button to toggle between sources — only one source is active at a time.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.