We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two metal 3.5 inch SAS SATA drive caddies with screws

Vszerda

Vszerda X7K8W 3.5" SAS/SATA Hard Drive Adapter 2 Pack

SKU CH-5X1E-W5MQP

A two-pack of metal 3.5" SAS/SATA drive caddies built for Dell PowerEdge 14th-16th Gen servers

  • Dimensions23.0 in x 12.0 in x 7.0 in
  • Weight0.35 kilograms
  • Package Contentsno
  • Secure drive mounting with high-quality metal construction
  • Fits Dell PowerEdge 14th, 15th and 16th generation servers
  • Supports both 3.5" SAS and SATA hard drives
  • Includes two caddies and eight mounting screws
  • Compact 9.06 x 4.72 x 2.76 inch form factor

Vszerda X7K8W 3.5" SAS/SATA Adapter 2 Pack

This two-pack of metal drive tray caddies fits 3.5-inch SAS or SATA hard drives into compatible Dell PowerEdge servers from the 14th, 15th and 16th generations. It is aimed at system administrators and IT teams who need to add or replace storage in supported rack and tower models.

Eight mounting screws and dual caddies

The bundle supplies two caddies and eight screws so both drives can be secured immediately without sourcing extra hardware. No software or additional adapters are included; the trays simply provide the mechanical interface between the drive and the server bay.

Supports one 3.5" drive per caddy

Each tray accepts a single 3.5-inch SAS or SATA drive, giving two bays of hot-swap capacity when both are installed. They do not accommodate 2.5-inch drives directly, nor do they convert SAS to SATA signalling, so drives must match the server backplane protocol.

Highlights

  • Secure drive mounting with high-quality metal construction
  • Fits Dell PowerEdge 14th, 15th and 16th generation servers
  • Supports both 3.5" SAS and SATA hard drives
  • Includes two caddies and eight mounting screws
  • Compact 9.06 x 4.72 x 2.76 inch form factor

Specifications

BrandHeretom
Dimensions23.0 in x 12.0 in x 7.0 in
Weight0.35 kilograms
Package Contentsno

Questions about this item

Will the metal tray need replacement after extended use in a PowerEdge R740?

The tray is constructed from high-quality metal for durability in high-demand server environments, and no replacement interval is defined by the manufacturer.

What limits drive density when populating multiple bays with these X7K8W caddies?

Each caddy supports one 3.5-inch SAS or SATA drive, so the total number of drives is limited by the available 3.5-inch bays in the server chassis.

How much heat or noise does the adapter add when the server runs continuously?

The passive metal bracket has no moving parts or electronics, so it adds no audible noise and negligible thermal load beyond the drive itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.