We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal 3.5 inch hard drive caddy with screw holes

Vszerda

Vszerda X7K8W 3.5" Hard Drive Adapter for PowerEdge 14th-16th Gen

SKU CH-8XW8-JQJS6

A metal 3.5-inch SAS/SATA drive caddy for Dell PowerEdge 14th-16th Gen servers, includes mounting screws

  • Color3.5" Hard Drive Caddy
  • Dimensions23.0 in x 12.0 in x 3.5 in
  • Weight0.136 kilograms
  • Securely mount 3.5" drives with sturdy metal construction
  • Supports both SAS and SATA drives for versatile storage expansion
  • Compatible with PowerEdge 14th, 15th and 16th generation servers
  • Includes four mounting screws for quick installation
  • Lightweight 0.14 kg design adds minimal weight to the chassis

3.5" SAS/SATA Server Caddy

The Vszerda X7K8W is a metal hard-drive tray caddy designed for Dell PowerEdge servers from the 14th through 16th generations. It accepts a single 3.5-inch SAS or SATA drive and includes four mounting screws for secure installation in compatible rack and tower chassis.

SAS and SATA Interface Limits

The caddy passes through the native SAS or SATA interface of the installed drive without adding any protocol conversion. Throughput and command-set support are therefore bounded entirely by the drive itself and the server backplane, not by the bracket.

Single-Drive Capacity Headroom

One 3.5-inch drive fits per tray, so total capacity scales with the number of bays the server provides. The bracket imposes no firmware or physical restriction on drive size, but it cannot accommodate 2.5-inch drives or multiple devices in a single slot.

Highlights

  • Securely mount 3.5" drives with sturdy metal construction
  • Supports both SAS and SATA drives for versatile storage expansion
  • Compatible with PowerEdge 14th, 15th and 16th generation servers
  • Includes four mounting screws for quick installation
  • Lightweight 0.14 kg design adds minimal weight to the chassis

Specifications

BrandHeretom
Color3.5" Hard Drive Caddy
Dimensions23.0 in x 12.0 in x 3.5 in
Weight0.136 kilograms

Questions about this item

Should I choose this caddy for a 3.5" SAS drive or a 3.5" SATA drive?

The tray accepts either a 3.5" SAS or a 3.5" SATA drive, so you can use whichever type your server bay supports.

Will the 3.5" drive run at its full SATA speed once mounted in this caddy?

The caddy passes the native SATA or SAS signal straight to the backplane, so the drive operates at the speed the server chassis and controller allow.

Does the X7K8W use a SAS or SATA interface to the server backplane?

It connects through the standard SAS/SATA backplane connector used in 14th-16th Gen PowerEdge servers, matching the drive type you install.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.