We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A black transmitter and receiver pair with HDMI ports and antennas

Vszerda

Vszerda Wireless HDMI Extender 5.8 GHz 656 ft KVM IR Loop Output

SKU CH-W1YA-2DE55

Wireless HDMI extender sends 1080P video up to 656 ft over 5.8 GHz with IR remote control, KVM loop output and ultra-low 0.06-0.1 s latency

  • Wireless 5.8 GHz link reaches 656 ft without cables
  • Loop-out passes 4K 60 Hz to a local display
  • KVM ports let you control the source with mouse and keyboard
  • IR extension relays 20–60 kHz remote commands to the source
  • Ultra-low latency of 0.06–0.1 s keeps video in sync

Wireless HDMI extender 5.8 GHz

The Vszerda Wireless HDMI Extender transmits 1080P video at 60 Hz and loops out 4K at 60 Hz over a 5.8 GHz link. It supports KVM control with a mouse and keyboard plus IR remote extension from 20 kHz to 60 kHz. Ultra-low latency sits between 0.06 and 0.1 seconds. The system creates its own wireless network so it does not interfere with existing Wi-Fi.

Setup checks before ordering

Verify that your source device has an HDMI output and your display has an HDMI input. Ensure a clear line of sight up to 656 ft for the rated range; obstructions will reduce the effective distance. Confirm the transmitter and receiver can each reach a power outlet. No driver or software installation is required for plug-and-play operation.

Build integration and freedoms

The extender replaces long HDMI cables and lets you place a display up to 656 ft from the source. Loop output passes a 4K 60 Hz signal to a local monitor while the remote receiver shows 1080P 60 Hz. KVM ports free you from sitting at the source computer. Two pairing modes — SW for one-to-many and SP for many-to-many — adapt to presentation, church, classroom or home-entertainment layouts.

Highlights

  • Wireless 5.8 GHz link reaches 656 ft without cables
  • Loop-out passes 4K 60 Hz to a local display
  • KVM ports let you control the source with mouse and keyboard
  • IR extension relays 20–60 kHz remote commands to the source
  • Ultra-low latency of 0.06–0.1 s keeps video in sync

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the box and what cables or accessories must I buy separately?

The kit includes a transmitter and a receiver with IR remote control extension. You will need to supply your own HDMI cables for the source and display, plus any USB cables for keyboard and mouse if you want KVM control.

Should I choose the unicast, splitter or switch pairing mode for my setup?

Use SW (unicast) for one transmitter to one receiver, SP (splitter) for one transmitter to multiple receivers, or SP (switch) for multiple transmitters sharing multiple receivers.

What does the 0.06–0.1 second latency mean when I am presenting or streaming?

The 0.06 to 0.1 s delay is barely perceptible, so slide clicks, video playback and mouse movements stay in sync with the screen for meetings, church services or home viewing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.