We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
USB-A male to 4-pin Firewire male cable, 150 cm, moulded strain relief

Vszerda

Vszerda USB to Firewire 1394 4-pin iLink cable 150cm for SONY DCR-TRV75E

SKU CH-P0AX-PYTCV

Connects a Sony DCR-TRV75E DV camera to a USB port using a 150 cm Firewire 1394 4-pin iLink cable supporting 100/200/400 Mbit/s transfer rates

  • Connect Sony DCR-TRV75E DV camera via USB
  • 150 cm cable length for flexible placement
  • Supports 100/200/400 Mbit/s IEEE 1394 transfer rates
  • 4-pin iLink to USB male connector fit
  • Molded strain relief protects against cable stress

Dedicated Sony DCR-TRV75E connection

This cable links the Sony DCR-TRV75E DV camera directly to a USB port using a 4-pin iLink connector. It is built exclusively for that model and will not function with other Firewire or USB devices. The 150cm length gives enough reach for desktop capture setups.

Build integration and clearance

The USB male end plugs into any standard USB socket without extra drivers or power adapters. The 4-pin male Firewire end mates with the camera’s iLink port, freeing the system from a dedicated 1394 expansion card. Molded strain relief protects both connectors during repeated insertion.

Bundled utility

No additional software, drivers or adapters are included in the package. The cable itself provides the complete physical link for DV footage transfer at 100, 200 or 400 Mbits per second. Buyers needing to connect other camcorders or Firewire peripherals must source a different cable.

Highlights

  • Connect Sony DCR-TRV75E DV camera via USB
  • 150 cm cable length for flexible placement
  • Supports 100/200/400 Mbit/s IEEE 1394 transfer rates
  • 4-pin iLink to USB male connector fit
  • Molded strain relief protects against cable stress

Specifications

No published specifications for this item yet.

Questions about this item

Will the 100/200/400 Mbits transfer rate hold steady during a long capture session?

The cable supports IEEE 1394 rates of 100, 200 and 400 Mbits; sustained throughput depends on the host controller and the SONY DCR-TRV75E, not on the cable itself.

Does the adapter get hot or draw extra power when used all day?

It is a passive cable with no active electronics, so it generates no heat and draws no power beyond what the USB and Firewire ports supply.

What must my computer already have for this cable to work with the SONY DCR-TRV75E?

A standard USB Type-A port and the correct Firewire driver for the SONY DCR-TRV75E; the cable connects the camera’s 4-pin iLink socket directly to USB.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Firewire (IEEE 1394) Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.