We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda USB 3.0 to SATA 22pin Adapter ASM1053e for 2.5" SATA HDD SSD

SKU CH-6ABC-XKGC0

Connects 2.5" SATA drives via USB 3.0 using an ASM1053e chip and 22-pin interface

  • Connect 2.5" SATA drives via USB 3.0
  • ASM1053e chip enables SATA 3.0 speeds
  • 22-pin connector powers and transfers data
  • Plug-and-play adapter for HDD or SSD

22-pin SATA to USB 3.0 adapter

The Vszerda adapter connects a 2.5 inch SATA hard drive or SSD to a USB 3.0 port using an ASM1053e bridge chip. It suits technicians and hobbyists who need quick, temporary access to bare laptop drives for imaging, recovery or data transfer. The 22-pin connector combines power and data in a single cable so no separate power brick is required. Buyers who need to attach 3.5 inch desktop drives or M.2 devices will need a different adapter.

Driver-free UASP support with 22-pin latch

The ASM1053e controller enables UASP on supported operating systems for lower latency than bulk-only transport. A moulded latch on the 22-pin plug secures the drive during bench work, while the short cable keeps the drive close to the host port to reduce strain. The assembly is powered entirely from the USB bus, so it works on laptops and desktops alike without an external supply. Builders who want a permanent internal mounting solution should consider a drive caddy instead.

Highlights

  • Connect 2.5" SATA drives via USB 3.0
  • ASM1053e chip enables SATA 3.0 speeds
  • 22-pin connector powers and transfers data
  • Plug-and-play adapter for HDD or SSD

Specifications

No published specifications for this item yet.

Questions about this item

What SATA version does the 22-pin connector on this adapter support?

The 22-pin connector supports SATA 3.0 for 2.5" SATA HDDs and SSDs.

Does this adapter need an external power supply to run a 2.5" SATA drive?

No, it draws power from the USB 3.0 port to operate a 2.5" SATA HDD or SSD.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.