Vszerda
Vszerda USB 3.0 19/20Pin Header to Dual Female Port Cable 0.5M
Connects a motherboard 19/20-pin header to two front-panel USB 3.0 Type-A ports with a 0.5 m cable supporting 5 Gbps, 480 Mbps and 1.5 Mbps speeds
- Connector TypeUSB Type A
- Connector DetailUSB Type A
- ConstructionCopper
- Connect motherboard 20-pin header to dual front-panel USB 3.0 ports
- Supports keyboards, mice, flash drives, external drives and printers
- 5 m cable length fits compact chassis builds
- USB 3.0 5 Gbps, 2.0 480 Mbps and 1.1 1.5 Mbps speeds
- Single-piece moulded construction with panel-mount screws for secure installation
Front-panel USB 3.0 header adapter
This cable converts a motherboard 19/20-pin header into two USB 3.0 Type-A ports for a chassis front panel. It measures 0.5 m long and is built with copper conductors and a single-piece moulded shell. The assembly includes panel-mount screws for secure installation. It is a new component intended for personal computer builds.
Builders adding front USB ports
Suits anyone whose case provides dual USB 3.0 cut-outs but whose motherboard only offers a single internal header. It supports keyboards, mice, flash drives, external hard drives and printers at full USB 3.0 speed. Not for systems lacking a 19/20-pin header or for users needing more than two additional ports. Also unsuitable where a longer internal cable run is required.
Dual-port 5 Gbps capacity
Each port delivers up to 5 Gbps super-speed bandwidth and remains backward compatible with 480 Mbps hi-speed and 1.5 Mbps low-speed devices. Two ports share the single header’s total throughput, so simultaneous heavy transfers on both drives will saturate the link. The 0.5 m length fits standard mid-tower layouts but reaches its limit in larger enclosures or rear-routed builds.
Highlights
- Connect motherboard 20-pin header to dual front-panel USB 3.0 ports
- Supports keyboards, mice, flash drives, external drives and printers
- 5 m cable length fits compact chassis builds
- USB 3.0 5 Gbps, 2.0 480 Mbps and 1.1 1.5 Mbps speeds
- Single-piece moulded construction with panel-mount screws for secure installation
Specifications
| Brand | chenyang |
|---|---|
| Connector Type | USB Type A |
| Connector Detail | USB Type A |
| Construction | Copper |
Questions about this item
Does my motherboard need a 19/20-pin internal USB 3.0 header for this cable to work?
Yes, the cable plugs directly into a motherboard 20-pin USB 3.0 socket and converts it to two external Type-A ports on the front panel.
Will my USB 2.0 flash drives and peripherals still work at their normal speeds when connected through this adapter?
The cable is compliant with USB 2.0 Hi-Speed at 480Mbps and USB 1.1 Low-Speed at 1.5Mbps, so older devices operate at their rated speeds.
How can I confirm the cable is delivering USB 3.0 performance after installation?
Connect a USB 3.0 storage device and verify the transfer rate reaches the 5Gbps Super-Speed specification listed for the cable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
