We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
4XEM 2-to-1 RJ45 splitter adapter with CAT6 cable and female ports

4XEM

4XEM 4XCAT6SPLITTER 2-to-1 RJ45 splitter adapter projector accessory

SKU CH-3TAM-DHCAT MPN 4XCAT6SPLITTER

Splits one CAT6 cable into two RJ45 connections for expanded Ethernet installations

  • Connects two patch cables to one panel for simpler cabling
  • Splits a single CAT6 run into two Ethernet signals
  • Designed for hub-to-panel wiring, not PC-to-PC sharing
  • Increases RJ-45 outlet density in structured installs
  • CAT6-rated adapter supports existing Gigabit infrastructure

2-to-1 RJ45 Splitter for CAT6

This passive adapter divides a single CAT6 cable into two separate RJ45 connections, letting two Ethernet signals share one installed run. It is built for structured cabling projects where adding new cable pulls is impractical. The splitter terminates in a male plug on one side and two female ports on the other. It requires a hub or switch at the far end to operate correctly.

Installers extending port density without new

Suits network technicians who need to serve two devices from one existing CAT6 drop and can terminate both sides with a patch panel or switch. Not for users who want to split one live Ethernet jack directly to two computers without an upstream hub. Home owners lacking access to the patch-panel side cannot use this adapter as a simple port multiplier. It does not negotiate speed or provide signal amplification.

Passive 2-to-1 wiring on CAT6 cable

The key specification is the passive 2-to-1 pin-out that maps the eight conductors of one CAT6 cable onto two distinct RJ45 interfaces. This fixed wiring scheme determines whether the adapter matches the installation topology. Buyers must verify that both ends of the link can be patched to active switch ports for the splitter to function.

Highlights

  • Connects two patch cables to one panel for simpler cabling
  • Splits a single CAT6 run into two Ethernet signals
  • Designed for hub-to-panel wiring, not PC-to-PC sharing
  • Increases RJ-45 outlet density in structured installs
  • CAT6-rated adapter supports existing Gigabit infrastructure

Specifications

No published specifications for this item yet.

Questions about this item

What cables and outlet do I need to use the 4XCAT6SPLITTER?

You need two RJ45 patch cables from your hub and one CAT6 cable running to the wall outlet. The splitter joins the two patch cables onto that single CAT6 run.

Can I keep my existing hub and patch panel when adding this splitter?

Yes. The splitter connects two patch cables from the hub to one port on the patch panel, so your current hub and panel remain in place.

How can I verify the splitter is passing both Ethernet links after installation?

Plug each patch cable into the hub and confirm both corresponding switch ports show link lights; then check the far-end devices for active connections.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.