We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black USB 2.0 splitter cable with adhesive backing and 9-pin connectors

Vszerda

Vszerda USB 2.0 Front Panel Header 1-to-2 9Pin/10Pin Splitter Cable

SKU CH-K7NF-HRP2S

Splits one motherboard USB 2.0 header into two 9-pin ports at 480 Mbps with adhesive backing for secure mounting

  • Connector Number9
  • Extends one front-panel USB header to two 9-pin connectors
  • On-board USB 2.0 hub chip delivers 480 Mbps bandwidth
  • Each port supplies up to 500 mA at 5 V
  • Adhesive backing allows secure mounting on motherboard or chassis
  • Compact 5.75 x 4.17 x 0.55 inch form factor fits tight builds

Front-Panel USB Splitter for Desktop Builders

This Vszerda adapter turns one 9-pin motherboard header into two 9-pin connectors so a single USB 2.0 header can serve front-panel ports on a desktop chassis. It is aimed at system integrators and hobbyists who need extra internal USB connections without adding a controller card.

Passive Hub Chip with Glue-Back Mounting

An onboard USB 2.0 hub chipset provides 480 Mbps bandwidth and supplies 500 mA at 5 V to each downstream port. The cable carries no active cooling and draws negligible power, so thermals and noise remain identical to a standard header connection. Adhesive backing lets the module stick directly to the motherboard or chassis floor.

Replaces Header Shortages on Boards

The splitter solves the common limitation of motherboards that expose only a single front-panel USB header while the case provides two or more port clusters. It is not suited for builds that require USB 3.0 or higher speeds, nor for users who need more than two additional 9-pin connections from one header.

Highlights

  • Extends one front-panel USB header to two 9-pin connectors
  • On-board USB 2.0 hub chip delivers 480 Mbps bandwidth
  • Each port supplies up to 500 mA at 5 V
  • Adhesive backing allows secure mounting on motherboard or chassis
  • Compact 5.75 x 4.17 x 0.55 inch form factor fits tight builds

Specifications

Brandchenyang
ModelCY-U2-066
Connector Number9

Questions about this item

How do I install the Vszerda USB 2.0 splitter cable and which step do people often miss?

Plug the single 9-pin connector into the motherboard header, then attach the two 9-pin branches to your front-panel ports. The step often missed is removing the protective film and pressing the adhesive backing firmly onto the board or chassis so the hub stays fixed.

What maintenance or replacement will the Vszerda USB 2.0 splitter cable need later?

No scheduled maintenance is required. If a front-panel port stops working, check that the 9-pin connectors are fully seated and the adhesive mount has not loosened; replace the cable only if the internal hub chipset fails.

What limit appears first on the Vszerda USB 2.0 splitter cable under sustained use?

Each branch is rated for 500 mA at 5 V, so the first limit is the 500 mA per port current ceiling; total bandwidth is shared at 480 Mbps across both ports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.