We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flat cable with two stacked USB 3.0 Type-A ports and a 20-pin motherboard header, 50 cm long

Vszerda

Vszerda U3-043-ST-XY Stackable USB 3.0 Dual Port to 20Pin 19Pin Header Cable 50cm

SKU CH-1PB3-NZA55

A 50 cm internal cable converts one motherboard 20-pin USB 3.0 header into two stackable Type-A ports with screw holes and fixed feet for front-panel mounting

  • TypeUSB Type A, USB
  • Length11 L x 11 W x 1 H centimeters
  • SpecificationsUSB, USB Type A, U3-043-ST-XY, 11 L x 11 W x 1 H centimeters
  • Connector NumberUSB, USB Type A
  • Connector DetailUSB to USB Type A
  • FeaturesUSB, USB Type A
  • Adds two front-panel USB 3.0 ports from one 20-pin header
  • 5 Gbps throughput with USB 3.0 host and device
  • Stackable DIP connector with fixed feet for secure PCB mounting
  • Ultra-flat slim cable design saves space and eases routing
  • 50 cm length fits standard chassis front-panel layouts

Stackable USB 3.0 Dual Port Adapter

This internal cable converts a single motherboard 20-pin USB 3.0 header into two stackable Type-A ports with fixed mounting feet. It is designed for builders who need front-panel or chassis USB 3.0 connectivity from one internal header.

USB 3.0 Header Bandwidth Limit

The link runs at up to 5 Gbps when paired with a USB 3.0 host and device, which is ten times the throughput of USB 2.0. Both ports share the single 20-pin header bandwidth, so simultaneous high-speed transfers divide the available 5 Gbps between them.

Check Header Pin Count and Clearance

Verify that your motherboard provides a 20-pin USB 3.0 header and that the 50 cm cable reaches your chosen mounting location. The stackable DIP connector adds height, so confirm there is enough vertical space behind the front panel or PCB for the fixed feet and dual ports.

Highlights

  • Adds two front-panel USB 3.0 ports from one 20-pin header
  • 5 Gbps throughput with USB 3.0 host and device
  • Stackable DIP connector with fixed feet for secure PCB mounting
  • Ultra-flat slim cable design saves space and eases routing
  • 50 cm length fits standard chassis front-panel layouts

Specifications

Brandxiwai
ModelU3-043-ST-XY
TypeUSB Type A, USB
Length11 L x 11 W x 1 H centimeters
SpecificationsUSB, USB Type A, U3-043-ST-XY, 11 L x 11 W x 1 H centimeters, 11 grams, xiwai
Connector NumberUSB, USB Type A
Connector DetailUSB to USB Type A
FeaturesUSB, USB Type A

Questions about this item

Should I pick a different length or pin-count version of this stackable cable?

The product is offered as a 50 cm cable with a 20-pin 19-pin header; no alternative lengths or pin configurations are listed.

What real-world speed will I see when I plug two USB 3.0 devices into this header cable?

With a USB 3.0 host and device the link runs at up to 5 Gbps, compliant with the USB 3.0 base specification.

Does the 20-pin 19-pin motherboard header limit the cable to USB 2.0 speeds?

No, the header is wired for USB 3.0 and supports the full 5 Gbps throughput when the host and device are both USB 3.0.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.