We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 32AWG ribbon cable with SFF-8654 8i male connectors on both ends, .5 m length

Vszerda

Vszerda SlimSAS SFF-8654 8i cable 0.5 m 24 Gbps

SKU CH-M8ED-3MTCH

Connects SAS storage with 24 Gbps PCIe 4.0 bandwidth, 85-ohm impedance and 74-pin density in a 0.5 m 32AWG ribbon cable

  • TypeSFF-8654 to SFF-8654
  • Length0.5
  • Connector Number74
  • Connector DetailSff-8654 to Sff-8654 8i
  • Terminal GenderMale-to-Male
  • Speed24 gigabits_per_second
  • 24 Gbps bandwidth supports PCIe 4.0 for high-performance servers
  • 85-ohm impedance with 74-pin design minimises signal loss and crosstalk
  • 32AWG ribbon cable enables easy routing in tight spaces
  • T10/SCSI compliance ensures stability with major OEM storage solutions
  • 5 m length suits compact high-density server deployments

Vszerda SlimSAS SFF-8654 8i cable 0.5 m 24 Gbps

This Vszerda SlimSAS cable connects two SFF-8654 8i ports at 24 Gbps over a 0.5 m length. It is built for servers, storage arrays and high-performance computing clusters that need PCIe 4.0 bandwidth with low latency. The 74-pin male-to-male design suits dense backplane and direct-attach topologies. Buyers who need longer runs or different connector types should look elsewhere.

Installation and common issues

The 32 AWG ribbon construction makes the cable flexible for routing in tight chassis spaces. Unshielded connectors keep the profile slim but require care to avoid snagging on adjacent components during insertion. Misaligned pins are the most frequent cause of link errors; verify orientation before applying force. Do not exceed the minimum bend radius or the 85-ohm impedance may be compromised.

Pre-order checklist

Confirm that both endpoints present SFF-8654 8i receptacles and support 24 Gbps PCIe 4.0 signalling. Check that the 0.5 m reach matches your rack or shelf layout without tension. Ensure the host controller and backplane firmware are current for T10/SCSI compliance. Systems requiring shielded cables or alternative pinouts are not compatible with this model.

Highlights

  • 24 Gbps bandwidth supports PCIe 4.0 for high-performance servers
  • 85-ohm impedance with 74-pin design minimises signal loss and crosstalk
  • 32AWG ribbon cable enables easy routing in tight spaces
  • T10/SCSI compliance ensures stability with major OEM storage solutions
  • 5 m length suits compact high-density server deployments

Specifications

Brand10Gtek
TypeSFF-8654 to SFF-8654
Length0.5
Connector Number74
Connector DetailSff-8654 to Sff-8654 8i
Terminal GenderMale-to-Male
Speed24 gigabits_per_second
SpecificationsSFF-8654 to SFF-8654
ShieldingHigh Speed
FeaturesHigh Speed

Questions about this item

How do I confirm the 24 Gbps link is active after installing the SFF-8654 8i cable?

Check the host controller or HBA management utility for a negotiated speed of 24 Gbps on each of the 8 lanes; the 85-ohm impedance and 74-pin design should report zero errors under load.

What comes in the box and what must I source separately?

The package contains the 0.5 m SlimSAS SFF-8654 8i male-to-male cable only; you must provide compatible backplanes, HBAs or RAID controllers with SFF-8654 ports.

Which length should I choose for a 1 U server chassis?

The 0.5 m (1.64 ft) 32 AWG ribbon cable is sized for short intra-chassis runs; select a longer variant only if the routing distance exceeds half a metre.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.