Vszerda
Vszerda Slimline SAS 4.0 SFF-8654 4i 38pin to 4×SAS 29pin Fanout Cable 100cm
Connects a Slim SAS 4i 38-pin controller to four SAS 29-pin drives at 24 Gbps per channel over 100 cm
- TypeSAS
- ColorBlack
- Connector Number67
- Connector DetailSff-8654 & Sff-8482
- Terminal GenderMale-to-Female
- Speed24 uk_pounds
- 100 cm length fits server chassis
- 24 Gbps per channel meets SAS 3.0/4.0 spec
- Slim SFF-8654 38-pin to four 29-pin fanout
- Compact connectors save drive-bay space
- Four independent channels on one cable
Slimline SAS 4.0 fanout cable for dense storage
This 100 cm cable connects a Slim SAS 4i 38-pin host port to four SAS 29-pin target drives. It serves servers, data-storage arrays and workstations that need high-density internal links. The 1-to-4 fanout lets one controller channel address multiple disks without extra backplane slots.
Verify host port and drive connectors before
Your controller must present a Slim SAS SFF-8654 4i 38-pin receptacle. Each target drive needs a standard SAS 29-pin SFF-8482 connector. The assembly is wired male-to-female, so the host plug inserts into the controller and the four drive plugs accept the disk connectors directly.
Shielded 24 Gbps lanes in a space-saving layout
Black shielding wraps the six-seven conductor paths to support 24 Gbps per channel under SAS 3.0 and 4.0 specifications. The compact Slim SAS heads reduce cable bulk inside crowded chassis, easing routing and improving airflow around adjacent components.
Highlights
- 100 cm length fits server chassis
- 24 Gbps per channel meets SAS 3.0/4.0 spec
- Slim SFF-8654 38-pin to four 29-pin fanout
- Compact connectors save drive-bay space
- Four independent channels on one cable
Specifications
| Brand | Vszerda |
|---|---|
| Type | SAS |
| Color | Black |
| Connector Number | 67 |
| Connector Detail | Sff-8654 & Sff-8482 |
| Terminal Gender | Male-to-Female |
| Speed | 24 uk_pounds |
| Specifications | SAS |
| Shielding | 1-to-4 |
| Features | 1-to-4 |
Questions about this item
Does the box contain only the fan-out cable or do I need separate drive-side connectors?
The cable is a single assembly with a Slim SAS 4i 38-pin host end and four SAS 29-pin target ends already attached, so no extra connectors are required.
Should I choose a different length or pin count for a typical server backplane?
This model is fixed at 100 cm with a 38-pin host connector and four 29-pin drive connectors, matching the common Slimline SAS 4.0 SFF-8654 fan-out layout.
What does the 24 Gbps per channel figure mean when the cable is installed in a RAID array?
Each of the four lanes operates at up to 24 Gbps, meeting the SAS 4.0 specification for high-throughput server and storage workloads.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114821BTC
In stock
