We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Slim SAS 4i 38-pin male to four SATA 7-pin male fan-out cable, 50 cm round copper conductor, black connectors

Vszerda

Vszerda Slim Line SAS 4.0 SFF-8654 4i 38 Pin to 4 SATA 7 Pin Cable 50cm

SKU CH-K6VF-ABC00

Connects a Slim SAS SFF-8654 4i controller to four SATA drives with 24 Gbps per channel over a 50 cm cable

  • TypeSATA
  • Length1.6 feet
  • Connector DetailSff-8654
  • Terminal GenderMale-to-Male
  • Speed24 gigabits_per_second
  • ConductorCopper
  • Compact Slim SAS connector saves chassis space
  • Four independent channels carry 24 Gbps SAS and 8 GT/s PCIe each
  • 50 cm length fits tight server and workstation builds
  • Male-to-male copper conductors ensure reliable data transfer
  • Meets SAS 3.0 and Ultraport SlimSAS SFF-8654 specifications

Slim Line SAS 4.0 SFF-8654 4i Cable

This 50cm fanout cable connects a host controller with a Slim SAS SFF-8654 4i 38-pin connector to four target drives using standard SATA 7-pin connectors. It supports SAS 4.0 and PCIe Gen3 specifications with a data rate of 24Gbps per channel for SAS and 8GT/s for PCIe. The male-to-male copper conductors are designed for internal server and workstation storage configurations. The compact connector form factor saves space inside dense chassis.

Suited For

This cable suits builders wiring four SATA hard disks or SSDs to a single SlimLine SAS 4i port on a RAID controller or backplane. It fits server and data-storage enclosures where the SFF-8654 interface is specified. It is not suited for installations needing a longer reach than 50cm or for direct attachment to drives that lack a native SATA 7-pin interface.

Deciding Specification

The host-side connector is a Slim SAS SFF-8654 4i 38-pin male plug; the four target ends are SATA 7-pin male plugs. Verify that your controller or backplane presents exactly this 38-pin SlimLine SAS 4i receptacle before ordering.

Highlights

  • Compact Slim SAS connector saves chassis space
  • Four independent channels carry 24 Gbps SAS and 8 GT/s PCIe each
  • 50 cm length fits tight server and workstation builds
  • Male-to-male copper conductors ensure reliable data transfer
  • Meets SAS 3.0 and Ultraport SlimSAS SFF-8654 specifications

Specifications

Brandchenyang
ModelSF-103-0.5M
TypeSATA
Length1.6 feet
Connector DetailSff-8654
Terminal GenderMale-to-Male
Speed24 gigabits_per_second
ConductorCopper
FeaturesData Transfer

Questions about this item

What does the 24 Gbps per channel rating mean when the cable is installed in a server?

Each of the four lanes can move data at up to 24 Gbps for SAS traffic or 8 GT/s for PCIe Gen3, giving the full bandwidth the controller and drives negotiate.

Which specification does the SFF-8654 4i connector follow and what does that limit in practice?

The connector meets the SAS 3.0 and Ultraport SlimSAS SFF-8654 standards, so it caps at SAS 24 Gbps per lane and PCIe Gen3 8 GT/s per lane.

What clearance does the 38-pin Slim SAS plug and the 50 cm round cable need inside a chassis?

The straight 38-pin Slim SAS 4i plug and 1.6-foot round fan-out to four SATA 7-pin connectors are designed for tight server and workstation drive bays.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.