We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black 90-degree reverse 8-pin PCIe power adapters with aluminum shield housings

Vszerda

Vszerda Shield Series 8-Pin PCIe GPU Power Adapter 90° Reverse Black 2-Pack

SKU CH-BFZT-G01PJ

A 90° reverse 8-pin PCIe power adapter with aluminium shielding for tidy GPU cable routing, sold as a two-pack

  • Shield-inspired aluminium housing adds visual appeal to the build
  • 90° reverse connector routes power cleanly in tight cases
  • Aluminium shell with venting channels improves heat dissipation
  • New terminals maintain secure contact under sustained full-load operation
  • Supplied as a two-pack for dual 8-pin GPU configurations

90° Reverse PCIe Adapter Pair

This two-pack supplies 90-degree reverse-angled 8-pin PCIe power adapters for graphics cards that need a tight rear-I/O clearance. Builders working in compact cases or routing cables behind a vertical GPU mount use them to avoid sharp bends on the stock leads.

Aluminium Shell With Vent Channels

Each connector wraps the terminals in an aluminium housing that incorporates thermal venting channels to move heat away from the pins. The reverse-orientation plug and right-angle exit keep the cable run parallel to the card, reducing strain on the socket and simplifying internal cable management.

Secure Terminals For Continuous Load

Newly developed terminal contacts maintain a firm, low-resistance connection during sustained full-load operation, limiting temperature rise at the interface. The rigid aluminium body and angled geometry prevent accidental dislodgement while allowing airflow to pass through the vent channels without adding bulk.

Highlights

  • Shield-inspired aluminium housing adds visual appeal to the build
  • 90° reverse connector routes power cleanly in tight cases
  • Aluminium shell with venting channels improves heat dissipation
  • New terminals maintain secure contact under sustained full-load operation
  • Supplied as a two-pack for dual 8-pin GPU configurations

Specifications

No published specifications for this item yet.

Questions about this item

Does the 90-degree reverse 8-pin PCIe adapter limit power delivery to the graphics card?

No, the adapter passes the full 8-pin PCIe specification through its newly developed terminals, so the GPU receives the same power as a straight cable.

What clearance does the 90-degree reverse connector need behind the graphics card?

The right-angled reverse plug projects sideways from the card's power socket, so you need enough space between the card edge and the side panel or adjacent cards for the bend.

How do you install the Vszerda Shield Series adapter without stressing the GPU power socket?

Route the cable first, then press the adapter firmly onto the card's 8-pin header until the latch clicks; forcing the cable after the adapter is seated is the common mistake that bends pins.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.