We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 8-pin PCIe GPU power adapter with 180-degree U-turn aluminium connector

Vszerda

Vszerda Shield Series 8-Pin PCIe GPU Power Adapter 180-Degree U-Turn Reverse Type Black

SKU CH-W35X-8GM8X

An 8-pin PCIe GPU power adapter with a 180-degree U-turn reverse connector and aluminium housing for improved heat dissipation and cable management

  • Shield-inspired design adds visual appeal to your system
  • 180-degree U-turn connector fits tight GPU clearances
  • Aluminium housing with thermal vents improves heat dissipation
  • New terminals ensure stable power delivery under full load
  • Optimised cable routing enhances internal airflow

8-Pin PCIe Power Adapter for GPU Builders

This Vszerda Shield Series adapter connects a standard 8-pin PCIe power cable to a graphics card that requires an 8-pin connector. The 180-degree U-turn reverse-type design routes the cable back toward the motherboard, helping builders achieve a cleaner internal layout in tight cases. It is sold as a single black unit with an aluminium housing.

Replaces Straight 8-Pin Connectors When Clearance

A straight 8-pin plug often presses against a side panel or forces a sharp bend in the cable, which can strain the GPU socket over time. This adapter is worth fitting when the graphics card sits close to the case window or when adjacent components leave no room for a gentle cable curve, letting the wire run parallel to the board instead of jutting out.

Limited to 8-Pin PCIe Devices

The connector works only with hardware that uses an 8-pin PCIe power socket, so it cannot serve 6-pin, 12VHPWR or proprietary power inputs. The reverse-type 180-degree angle is moulded into the adapter and cannot be rotated to 90 degrees or a standard orientation, so the builder must confirm the GPU’s socket layout matches this fixed direction before purchase.

Highlights

  • Shield-inspired design adds visual appeal to your system
  • 180-degree U-turn connector fits tight GPU clearances
  • Aluminium housing with thermal vents improves heat dissipation
  • New terminals ensure stable power delivery under full load
  • Optimised cable routing enhances internal airflow

Specifications

No published specifications for this item yet.

Questions about this item

How much clearance does the 180-degree U-turn connector need behind the graphics card?

The 180-degree U-turn bends the cable back toward the motherboard, so allow enough space between the card's rear edge and the side panel or drive cage for the connector to sit without forcing the cable.

What is the correct orientation when plugging the reverse-type adapter into an 8-pin GPU socket?

Align the adapter's keyed shroud with the GPU's 8-pin header so the latch clicks on the correct side; the reverse-type layout mirrors a standard plug, so forcing it the other way will damage the pins.

Does the aluminum housing require any thermal paste or periodic cleaning to maintain heat dissipation?

No thermal paste is needed; the aluminum shell uses integrated venting channels for passive airflow, so occasional dust removal with compressed air is the only upkeep.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.