We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 180-degree U-turn 8-pin PCIe GPU power adapter with aluminum shield design

Vszerda

Vszerda Shield Series 8-Pin PCIe GPU Power Adapter 180-Degree U-Turn Angled Connector Aluminum Design White

SKU CH-ZSV3-2VWGV

An 8-pin PCIe GPU power adapter with a 180-degree U-turn angled connector and aluminum housing for improved heat dissipation

  • Shield-inspired design adds distinctive visual appeal to builds
  • 180-degree U-turn angle fits tight GPU clearances
  • Aluminum housing with venting channels improves heat dissipation
  • New terminals maintain stable connection under sustained full load
  • Optimised cable routing enhances internal airflow and tidiness

Vszerda Shield Series 8-Pin PCIe Adapter

The Vszerda Shield Series adapter connects a standard 8-pin PCIe power cable to a graphics card. Its 180-degree U-turn angle routes the cable parallel to the card for a clean internal layout. The white aluminium housing adds a distinctive shield-inspired visual accent to the build.

Builders needing a 180-degree standard orientation

This adapter suits builders who need a straight-back 180-degree bend on a standard-type 8-pin connector. It is not for systems requiring a 90-degree turn or a reverse-orientation connector. Buyers with limited side-panel clearance should verify the bend direction matches their card's port placement.

180-degree U-turn standard-type connector

The decisive specification is the 180-degree U-turn angle on a standard-type 8-pin PCIe connector. Only this exact geometry aligns the cable correctly for specific graphics card port positions. Confirm the required angle and orientation before purchase to ensure physical compatibility.

Highlights

  • Shield-inspired design adds distinctive visual appeal to builds
  • 180-degree U-turn angle fits tight GPU clearances
  • Aluminum housing with venting channels improves heat dissipation
  • New terminals maintain stable connection under sustained full load
  • Optimised cable routing enhances internal airflow and tidiness

Specifications

No published specifications for this item yet.

Questions about this item

How does the 180-degree U-turn angle change the way the cable sits inside my case?

The connector bends back on itself so the cable runs parallel to the graphics card, keeping the wire flat against the PCB and out of the airflow path.

What does the aluminium housing with thermal venting do for the connection?

The metal shell acts as a heatsink and the vent channels let hot air escape, helping the terminals stay cooler during sustained full-load operation.

Which way does the 180-degree STD connector point relative to the card bracket?

STD orientation routes the cable toward the rear expansion-slot area, so it exits the GPU alongside the display outputs rather than toward the motherboard.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.