We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 12V-2x6 GPU extension cable with 90-degree adapter and cable combs

Vszerda

Vszerda Shield PCIe 5.1 GPU Extension Cable 12V-2x6 90° White

SKU CH-5TXK-22FEP

A 16 AWG PCIe 5.1 12V-2x6 extension cable with a 90° angle adapter, soldered joints and combs for RTX 40/50 series cards up to 600 W

  • Clean shield-style aesthetic elevates build appearance
  • Flexible 16AWG wiring simplifies routing in tight cases
  • Compact 90° angle adapter fits ITX and ATX chassis
  • Soldered joints resist detachment from repeated bending
  • Supports ATX 3.1 12V-2x6 and RTX 40/50 series up to 600W

Shielded PCIe 5.1 Extension for RTX 40/50 Series

This 12V-2x6 extension cable connects an ATX 3.1 power supply to GeForce RTX 40 and 50 series graphics cards. The 16-pin design carries both 12-volt and sense lines through a single connector. Builders who prefer a clean white aesthetic and need to route power around tight corners will appreciate the shield-inspired styling and included cable combs.

16 AWG wire with soldered joints and 90-degree

The 16 AWG conductors remain highly flexible for routing in compact ITX or ATX chassis. Soldered connections at each terminal reduce the risk of detachment caused by repeated bending. The compact 90-degree angle adapter keeps the cable close to the card, helping airflow and lowering the profile in cramped builds. Rated for over 600 W continuous delivery under the PCIe 5.1 specification.

Reverse-type connector orientation

The reverse-type pin layout matches the 12V-2x6 socket on supported RTX 40 and 50 series cards, so the cable exits toward the motherboard side rather than the exterior. Supplied combs keep individual wires aligned for a neat finish. Not recommended for RTX 5090 installations because of extreme power spikes; a gap-free, fully seated connection is essential for safe operation on all other supported models.

Highlights

  • Clean shield-style aesthetic elevates build appearance
  • Flexible 16AWG wiring simplifies routing in tight cases
  • Compact 90° angle adapter fits ITX and ATX chassis
  • Soldered joints resist detachment from repeated bending
  • Supports ATX 3.1 12V-2x6 and RTX 40/50 series up to 600W

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 90 degree 12V-2x6 adapter on the extension cable and what step is most often missed?

Align the 16 pin connector with the GPU socket, press straight in until the latch clicks, then verify zero gap between the plug and housing; the missed step is skipping that final gap check.

What maintenance or replacement will the 16AWG soldered cable need over time?

Inspect the soldered joints and combs every few months for dust buildup or cable fatigue; replace the extension if any conductor shows discoloration or the latch no longer engages firmly.

What limit appears first when the cable runs near 600W continuously?

The connector temperature rises first; sustained loads at the rated wattage can heat the 12V-2x6 interface, so keep airflow across the 90 degree adapter and avoid daisy chaining extensions.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.