Vszerda
Vszerda SFF-8654 8i 74pin to Dual SFF-8087 Mini SAS Cable 100 cm
Connects a Slimline SFF-8654 74-pin backplane to dual SFF-8087 Mini SAS controllers at 24 Gbps per channel over 100 cm
Cable Length 100 cm
- 100 cm
- 50 cm
- Connects Slimline SFF-8654 backplane to dual SFF-8087 controller
- 24 Gbps SAS and 8 GT/s PCIe per channel
- Meets SAS 4.0 and Ultraport SlimSAS SFF-8654 specification
- Four-channel signal transmission in a space-saving connector design
- 100 cm length for flexible server and workstation routing
Connection Bridge
This Vszerda cable links a Slimline SFF-8654 8i 74pin port to two SFF-8087 Mini SAS connectors, letting builders attach a dense backplane to a standard controller in servers, data storage arrays or workstations. The 100 cm length provides reach across full-height chassis without excess slack.
Signal Performance
Each of the four channels carries 24 Gbps for SAS and 8 GT/s for PCIe, meeting SAS 4.0 and PCIe Gen3/4 specifications for reliable throughput under sustained loads. The slim connector and cable assembly reduce occupied space while maintaining signal integrity in normal operation.
Upgrade Path
The assembly replaces older wide Mini SAS cables when moving to SlimSAS 8654 density, freeing routing room in crowded enclosures. It is not suited for direct drive-to-drive links or single-port controllers that lack the dual 8087 interface.
Highlights
- Connects Slimline SFF-8654 backplane to dual SFF-8087 controller
- 24 Gbps SAS and 8 GT/s PCIe per channel
- Meets SAS 4.0 and Ultraport SlimSAS SFF-8654 specification
- Four-channel signal transmission in a space-saving connector design
- 100 cm length for flexible server and workstation routing
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
How do I connect the SFF-8654 74pin end to the backplane and the dual SFF-8087 ends to the controller?
Align the Slimline SFF-8654 8i 74pin connector with the backplane port and press firmly until the latch clicks; then plug each SFF-8087 Mini SAS connector into the matching controller ports, ensuring both are fully seated.
Will the cable or connectors need periodic replacement in a server environment?
The cable is a passive assembly with no moving parts; under normal rack conditions it does not require scheduled replacement, though inspect the latch tabs and cable jacket during routine hardware audits.
What is the maximum sustained data rate per channel before the cable becomes the bottleneck?
Each of the four channels supports 24 Gbps for SAS and 8 GT/s for PCIe, so the cable itself will not limit throughput until those per-channel rates are exceeded.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket








