We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue SAS cable with SFF-8644 and SFF-8088 male connectors, 6.6ft long

Vszerda

Vszerda SFF-8644 to SFF-8088 SAS cable 6.6ft 6Gbps

SKU CH-2Z3P-1JBBX

Connects SFF-8644 and SFF-8088 SAS devices at 6Gbps over 6.6ft with 30AWG shielding for RAID, servers and storage arrays

  • TypeSATA
  • ColorSFF-8644 to SFF-8088
  • Length6.6
  • Connector Number49
  • Connector DetailMini Sas
  • Terminal GenderMale-to-Male
  • 6Gbps per channel enables fast data transfer
  • 30AWG construction with 100 Ohms impedance ensures signal integrity
  • SAS 2.1 and 3.0 compatibility supports modern controllers
  • 6ft length suits rack and DAS deployments
  • Serial Attached SCSI 6.0 Gbps tested before dispatch

Connectivity for RAID and HBA

This cable links an internal SFF-8644 port to an external SFF-8088 port, supporting SAS and SATA drives. It is built for RAID systems, servers, storage racks and direct-attached storage. Buyers who need an internal-to-internal link or a different external connector cannot use this cable.

6 Gbps per channel with SAS 2.1 and 3.0 compliance

Each channel runs at 6 Gbps and the assembly is tested to the Serial Attached SCSI 6.0 Gbps specification. It meets SAS 2.1 and 3.0 interface requirements, so the link speed is the deciding factor for compatibility.

Stable signal over 6.6 ft with EMI resistance

The 30 AWG construction and shielding maintain signal integrity across the full 6.6 ft length during sustained transfers. Extraordinary EMI performance prevents degradation in dense rack environments where many cables run in parallel.

Highlights

  • 6Gbps per channel enables fast data transfer
  • 30AWG construction with 100 Ohms impedance ensures signal integrity
  • SAS 2.1 and 3.0 compatibility supports modern controllers
  • 6ft length suits rack and DAS deployments
  • Serial Attached SCSI 6.0 Gbps tested before dispatch

Specifications

BrandH!Fiber.com
TypeSATA
ColorSFF-8644 to SFF-8088
Length6.6
Connector Number49
Connector DetailMini Sas
Terminal GenderMale-to-Male
Speed6 gigabits_per_second
SpecificationsSATA
ShieldingData Transfer
FeaturesData Transfer

Questions about this item

What does 6Gbps per channel mean for drive speed in a RAID array?

Each lane delivers up to 6.0 Gbps, so a four-lane link moves data at the full SAS 3.0 rate without bottlenecking 6Gbps drives.

Which SAS standard limits the cable's practical throughput?

The cable is certified to SAS 2.1 and compatible with SAS 3.0, so the 6Gbps ceiling comes from the SAS 2.1 specification.

Will the SFF-8644 end fit a standard internal HBA bracket?

The SFF-8644 connector is an internal Mini SAS HD plug with 49 pins, designed for internal HBA ports, while the SFF-8088 end connects externally.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.