We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SFF-8644 to SFF-8088 SAS cable, 3.3 ft, male-to-male connectors

Vszerda

Vszerda SFF-8644 to SFF-8088 SAS cable 6.0 Gbps 3.3 ft

SKU CH-NTTY-BYZCA

Connects SFF-8644 and SFF-8088 SAS devices at 6.0 Gbps over 3.3 ft with 100-Ohm impedance

  • TypeSAS
  • Color1PC
  • Length3.3
  • Connector Number8
  • Connector DetailSff-8644 to Sff-8088
  • Terminal GenderMale-to-Male
  • Connects SFF-8644 and SFF-8088 SAS devices directly
  • 0 Gbps per lane supports SAS 2.1 and SAS 3.0 performance
  • AWG30 twinaxial 8-pair construction maintains 100-Ohm impedance
  • 3 ft length with male-to-male connectors fits rack layouts
  • Tested to Serial Attached SCSI 6.0 Gbps certification before shipment

SFF-8644 to SFF-8088 SAS Cable

This new Vszerda cable connects a Mini SAS HD SFF-8644 port to a standard SFF-8088 connector. It uses AWG30 twinaxial eight-pair wire with 100-ohm impedance to deliver 6.0 Gbps per lane. The assembly is one metre long including both male connectors. It is built for external RAID, server and data-centre links.

Suits external SAS 2.1 or 3.0 links.

The cable targets administrators who need a short, certified external run between a RAID controller or HBA and an external enclosure. It supports SAS 2.1 drive performance and complies with SAS 3.0 specifications. Builders working entirely inside a chassis or requiring a different connector pairing should look elsewhere.

6.0 Gbps per lane over a one-metre twinax assembly

Each lane is tested to 6.0 Gbps before shipment, meeting SAS 2.1 and 3.0 interface requirements. The 100-ohm controlled-impedance twinax construction keeps skew low across the eight differential pairs. This speed rating is the decisive figure when matching the cable to a controller or enclosure port.

Highlights

  • Connects SFF-8644 and SFF-8088 SAS devices directly
  • 0 Gbps per lane supports SAS 2.1 and SAS 3.0 performance
  • AWG30 twinaxial 8-pair construction maintains 100-Ohm impedance
  • 3 ft length with male-to-male connectors fits rack layouts
  • Tested to Serial Attached SCSI 6.0 Gbps certification before shipment

Specifications

Brand10Gtek
TypeSAS
Color1PC
Length3.3
Connector Number8
Connector DetailSff-8644 to Sff-8088
Terminal GenderMale-to-Male
Speed6 gigabits_per_second
SpecificationsSAS
ShieldingHigh Speed
FeaturesHigh Speed

Questions about this item

Does the SFF-8644 to SFF-8088 cable support 6.0 Gbps per lane in practice?

The cable is certified for Serial Attached SCSI 6.0 Gbps and compliant with SAS 2.1 and SAS 3.0 specifications, so each lane runs at 6.0 Gbps.

What clearance is needed for the SFF-8644 and SFF-8088 connectors?

Each connector measures 9.09 x 8.31 x 0.71 inches, so allow that space at both ends for the male-to-male plugs to seat fully.

How is the Vszerda cable installed, and which step is often missed?

Align the keyed SFF-8644 and SFF-8088 male connectors, push straight in until the latches click, then verify link lights; the missed step is not confirming both latches are fully engaged.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.