We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two short SFF-8643 to SFF-8087 Mini SAS HD cables, .5 m each, silver connectors on thin black copper wire

Vszerda

Vszerda SFF-8643 to SFF-8087 Mini SAS HD cable with sideband, .5 m, 2 pack

SKU CH-4Z4T-5F69W

Connects SFF-8643 controllers to SFF-8087 backplanes at 6 Gb/s with sideband, .5 m each, two cables

  • TypeSerial
  • Color2PC
  • Length0.5
  • Connector DetailSff-8643 to Sff-8087
  • Terminal GenderMale-to-Female
  • Speed6 gigabits_per_second
  • Connects 12 Gbps SAS drives to 6 Gbps controllers via SFF-8643 to SFF-8087
  • .5 m length fits tight server chassis with 30 AWG flexible copper conductors
  • 100 Ohm impedance and low-skew design maintains signal integrity at 6 Gbps data rate
  • Two cables per pack supports dual-port SAS drive configurations for redundancy
  • Compliant with SAS 2.1 and SAS 3.0 specifications for broad compatibility

Connector bridge for SAS backplanes

This cable pair links an SFF-8643 HD Mini SAS host port to an SFF-8087 Mini SAS backplane or expander. It serves server builders and storage integrators who need to connect newer controllers to existing 6Gbps drive enclosures. The .5 m length keeps internal routing tidy in dense chassis.

Fits between controller and drive bay

Male-to-female terminals plug directly into a RAID HBA or motherboard header on one side and a backplane or adapter on the other. Copper conductors and 100 Ohm impedance maintain signal integrity without requiring active equalisation. The thin, foldable jacket eases cable management in tight server cabinets.

Rated for 6Gbps with 12Gbps headroom

Compliant with SAS 2.1 and SAS 3.0 specifications, the assembly handles 6Gbps SAS and SATA drives today while the same part number supports 12Gbps drives when the system is upgraded. Thirty-AWG twin-axial construction limits skew at the higher rate. Buyers needing longer runs or external bulkhead connections will need a different cable.

Highlights

  • Connects 12 Gbps SAS drives to 6 Gbps controllers via SFF-8643 to SFF-8087
  • .5 m length fits tight server chassis with 30 AWG flexible copper conductors
  • 100 Ohm impedance and low-skew design maintains signal integrity at 6 Gbps data rate
  • Two cables per pack supports dual-port SAS drive configurations for redundancy
  • Compliant with SAS 2.1 and SAS 3.0 specifications for broad compatibility

Specifications

Brandipolex
ModelMini SAS 8643 to 8087
TypeSerial
Color2PC
Length0.5
Connector DetailSff-8643 to Sff-8087
Terminal GenderMale-to-Female
Speed6 gigabits_per_second
ConductorCopper
FeaturesData Transfer

Questions about this item

How far can I run this .5 m cable before signal loss becomes the first limit under sustained use?

The 0.5 m length and 100 Ohm impedance are designed for short internal server runs; longer distances would need active or optical cables.

Does the cable generate noticeable heat or noise when running all day at 6 Gb/s?

As a passive copper assembly it produces no noise and negligible heat; the 30 AWG conductors handle 6 Gb/s continuous traffic without thermal issues.

Which controller and backplane connectors must I already have for this SFF-8643 to SFF-8087 cable to work?

You need a controller or HBA with an SFF-8643 port and a backplane or expander with an SFF-8087 port; both ends are male-to-female.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.