We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SFF-8643 to four SATA breakout cable, 1.0 m, two-pack

Vszerda

Vszerda SFF-8643 to 4 SATA cable 1.0 m 2-pack

SKU CH-KGE4-JP89T

Connects an SFF-8643 port to four SATA drives at 6 Gbps with 1.0 m black cables

  • TypeSATA
  • ColorBlack
  • Length0.5 - 1
  • Connector DetailMini Sas
  • Terminal GenderMale-to-Female
  • Speed6 gigabits_per_second
  • Connect host bus adapters or RAID controllers to four SATA drives via SFF-8643
  • Stainless steel latches secure each connection for reliable internal storage operation
  • Supports 3 Gbps and 6 Gbps speeds for smooth migration toward 12 Gbps SAN systems
  • Compatible with Adaptec RAID 71605 and 7895 storage controllers
  • Two 1.0 metre cables included for flexible drive placement

SFF-8643 to 4 SATA breakout cable

This Vszerda cable connects a host bus adapter, RAID controller or motherboard with an SFF-8643 port to up to four SATA hard drives or SSDs. Each 1.0 metre assembly uses a 36-pin Mini SAS plug on the host side and four 7-pin SATA connectors on the drive side. Stainless steel latches secure the connection for reliable internal storage cabling.

Suits RAID and workstation builds with Mini SAS

Builders adding multiple drives to an Adaptec 71605 or 7895 controller, or similar SFF-8643-equipped hardware, can run four SATA devices from one port. The cable supports both 3 Gbps and 6 Gbps SATA speeds. Systems that lack an SFF-8643 host connector cannot use this breakout.

36-pin SFF-8643 host connector

The single specification that decides fit is the presence of an SFF-8643 (Mini SAS HD) port on the controller or motherboard. Without that 36-pin receptacle the cable cannot be attached, regardless of drive count or speed requirement.

Highlights

  • Connect host bus adapters or RAID controllers to four SATA drives via SFF-8643
  • Stainless steel latches secure each connection for reliable internal storage operation
  • Supports 3 Gbps and 6 Gbps speeds for smooth migration toward 12 Gbps SAN systems
  • Compatible with Adaptec RAID 71605 and 7895 storage controllers
  • Two 1.0 metre cables included for flexible drive placement

Specifications

BrandSonilco
ModelSFF-8643-4XSATA-1.0M-2PK
TypeSATA
ColorBlack
Length0.5 - 1
Connector DetailMini Sas
Terminal GenderMale-to-Female
Speed6 gigabits_per_second
FeaturesHigh Speed

Questions about this item

Will the stainless steel latches on the SFF-8643 connector need replacement after repeated drive swaps?

The stainless steel latches are built for secure, stable connections and long-term reliability, so they should not require replacement under normal use.

What is the maximum sustained throughput per SATA drive when all four ports are active?

Each SATA connector supports up to 6 Gbps, matching the SATA III specification for the drives you attach.

Does the 1.0 metre cable run hot or draw noticeable power during continuous RAID rebuilds?

The passive cable carries only signal and minimal power for the drives, so it generates no measurable heat and adds no audible noise during all-day operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.