We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 70 cm SAS SFF-8482 to SATA cable with 15 cm LP4 power lead

Vszerda

Vszerda SFF-8482 to SATA data cable 70 cm with 15 cm LP4 power

SKU CH-X013-3A25Q

Connects a 29-pin SAS drive to a 7-pin SATA controller with separate 15 cm LP4 power

  • Connect SAS drives to SATA controllers using 29-pin SFF-8482 connector
  • Power the drive directly from a 4-pin LP4 Molex supply
  • 70 cm data cable reaches across full-height chassis
  • 15 cm power tail fits tight drive bays
  • Supports 6 Gbps transfer rate for fast SAS storage

SFF-8482 to SATA adapter cable

This adapter connects a 29-pin SAS drive to a SAS-compatible SATA controller while supplying power through a 4-pin Molex LP4 plug. It is built for technicians integrating SAS storage into systems that only offer SATA host ports.

70 cm data reach with 15 cm power tail

The 70 cm data length gives routing flexibility inside a chassis or to an external enclosure, while the short 15 cm LP4 lead keeps the power connection close to the drive. Transfer rates run up to 6 Gbps, matching the SATA 6 Gbps ceiling.

Single-drive SAS integration without a backplane

The cable plugs directly into a motherboard or RAID controller SATA port and draws drive power from a standard Molex supply connector, removing the need for a SAS backplane. It suits builds adding one SAS drive where only SATA host ports and Molex power are available.

Highlights

  • Connect SAS drives to SATA controllers using 29-pin SFF-8482 connector
  • Power the drive directly from a 4-pin LP4 Molex supply
  • 70 cm data cable reaches across full-height chassis
  • 15 cm power tail fits tight drive bays
  • Supports 6 Gbps transfer rate for fast SAS storage

Specifications

No published specifications for this item yet.

Questions about this item

Will the 70 cm SFF-8482 to SATA cable reach from my SAS controller to a drive in a full-tower case?

The data cable is 70 cm long and the LP4 power tail adds 15 cm, giving enough slack for most full-tower layouts.

How can I verify the link is running at the supported 6 Gbps after I connect the 29-pin SFF-8482 end to my SAS backplane?

Check the controller BIOS or OS disk utility; it will display the negotiated link speed for the attached drive.

Does the package include a SATA power cable for the drive or only the LP4 molex connector shown?

The box contains the SFF-8482 to 7-pin SATA data cable with an integrated 15 cm LP4 male power connector; a separate SATA power cable is not included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.