We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SFF-8482 to SATA adapter cable with 15-pin power port .5 m

Vszerda

Vszerda SFF-8482 to SATA Cable .5 m 15PIN Power Port

SKU CH-61ZQ-TWC1T

Connects an SFF-8482 SAS drive to a SATA port with a 15-pin power connector using a 0.5 m copper cable rated at 6 Gb/s

  • TypeSAS to SATA
  • ColorBlack
  • Terminal GenderMale-to-Female
  • Speed6 gigabits_per_second
  • ConductorCopper
  • FeaturesHigh Speed
  • Connects SAS drive to SATA port using SFF-8482 interface
  • .5 metre cable keeps internal routing tidy
  • 15-pin power port supplies drive directly
  • Copper conductor supports 6 Gbit/s SATA 3 speeds
  • Male-to-female gender fits standard motherboard headers

SFF-8482 to SATA adapter cable

This adapter cable connects a SAS hard disk with an SFF-8482 connector to a motherboard SATA data port while providing a separate 15-pin power connection. It is intended for builders who want to use a compatible SAS drive on a standard SATA interface without a dedicated controller. The .5 m copper conductor supports 6 Gbit/s SATA3 signalling.

Sustained-load behaviour

The cable carries the native SATA3 6 Gbit/s data rate and relies on the drive and host controller for error handling during extended transfers. No active circuitry or signal conditioning is present, so performance under sustained load matches the limits of the attached SATA3 device and motherboard port. Cable length is kept short to minimise signal degradation.

Installation notes

Connect the SFF-8482 plug to the SAS drive, the SATA data plug to the motherboard, and the 15-pin power lead to a PSU SATA power cable. The motherboard must be set to AHCI mode and the SAS drive must carry the SATA logo; otherwise the drive will not be recognised. This adapter cannot make a non-SATA-labelled SAS drive work on a standard SATA motherboard.

Highlights

  • Connects SAS drive to SATA port using SFF-8482 interface
  • .5 metre cable keeps internal routing tidy
  • 15-pin power port supplies drive directly
  • Copper conductor supports 6 Gbit/s SATA 3 speeds
  • Male-to-female gender fits standard motherboard headers

Specifications

BrandVszerda
ModelSASHDCMPAW-1
TypeSAS to SATA
ColorBlack
Terminal GenderMale-to-Female
Speed6 gigabits_per_second
ConductorCopper
FeaturesHigh Speed

Questions about this item

How much power does the 15PIN power port draw when the cable runs all day?

The cable itself is passive copper and draws no power; only the attached SAS drive consumes power through the 15PIN connector.

What must my motherboard provide for this .5 m adapter to work?

A motherboard SATA port that is explicitly labelled SAS and set to AHCI mode, plus a standard SATA power cable from the PSU.

Will this let me keep using my older SATA‑only motherboard with a SAS drive?

No — the supplier states this cable cannot connect a SAS hard disk to a normal SATA motherboard; the board must have a SAS‑labelled SATA port.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.