We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda SFF-8482 SAS 29 pin to SATA cable 70cm

Vszerda

Vszerda SFF-8482 SAS to SATA cable 29 pin 70cm

SKU CH-JVNG-9XDDF

Connects SFF-8482 SAS 29-pin devices to a single SATA 7-pin port over 70 cm

  • Connect SATA drives to SAS controllers using SFF-8482 29-pin interface
  • Link SAS drives to SAS motherboards with direct 29-pin connection
  • 70 cm cable length fits standard chassis routing
  • Straight SFF-8482 connector ensures secure SAS port mating
  • Single SATA 7-pin to SAS 29-pin adapter enables cross-interface drive installation

SFF-8482 SAS to SATA cable 70 cm

This 70 cm cable carries an SFF-8482 29-pin connector on one end and a single SATA 7-pin connector on the other. It is built to link a SATA drive to a SATA motherboard or a SAS drive to a SAS motherboard. The straight plug orientation keeps routing tidy inside compact enclosures.

Suits builders joining matching interfaces

It works when both ends speak the same protocol: SATA-to-SATA or SAS-to-SAS. It will not bridge a SAS drive to a standard SATA motherboard unless that board includes a SAS chipset, and it will not bridge a SATA drive to a standard SAS motherboard unless the drive itself has a SAS chipset. Buyers needing cross-protocol connectivity should look at a different adapter.

One drive per cable with 70 cm reach

Each cable serves a single drive, so multiple devices require multiple cables. The 70 cm length covers typical chassis runs from backplane to motherboard header. Longer runs or dual-drive setups will need additional or longer cables.

Highlights

  • Connect SATA drives to SAS controllers using SFF-8482 29-pin interface
  • Link SAS drives to SAS motherboards with direct 29-pin connection
  • 70 cm cable length fits standard chassis routing
  • Straight SFF-8482 connector ensures secure SAS port mating
  • Single SATA 7-pin to SAS 29-pin adapter enables cross-interface drive installation

Specifications

No published specifications for this item yet.

Questions about this item

What motherboard connector is needed for the SFF-8482 end of this cable?

The 29-pin SFF-8482 plug fits a SAS controller or motherboard port that includes the SAS chipset.

Will this 70 cm cable let me attach a legacy SATA drive to a SAS backplane?

Only if the drive itself contains a SAS chipset; a standard SATA drive will not work on a SAS motherboard port.

How can I verify the link is active after connecting a SAS drive with this cable?

The drive should appear in the system BIOS or operating-system disk utility once the SAS controller detects it.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.