We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small right-angle adapter with SFF-8482 SAS plug and SATA socket

Vszerda

Vszerda SFF-8482 SAS to SATA Adapter 180 Degree 6G

SKU CH-36VJ-WE3Y7

Converts an SFF-8482 SAS port to a SATA 3.0 connection with a 180-degree angled header for tight spaces

  • 180-degree angle eases tight-case routing
  • SFF-8482 SAS interface connects to SATA 3.0 drives
  • 6 Gb/s link speed supports fast data transfer
  • Straight header design keeps cabling neat and secure

Vszerda SFF-8482 SAS to SATA Adapter

This adapter connects SATA storage devices to systems with SFF-8482 SAS ports. It is intended for builders or technicians who need a direct link between a SAS backplane or controller and a standard SATA hard drive or SSD. The 180-degree angle helps route cables neatly inside compact enclosures or server chassis where straight connectors would obstruct airflow or adjacent slots. It supports U.2 to SATA3.0 connectivity for compatible drives.

Practical limits of the SAS SATA interface

The adapter operates at the SATA 3.0 6G signalling rate so throughput is capped at the SATA III maximum. It does not convert SAS protocol commands; the host must support SATA tunnelling or the drive must be a native SATA device. The 180-degree form factor adds physical length which may not fit ultra-dense backplanes with tight port spacing. Builders needing multi-lane SAS aggregation or active signal conversion should look for a different class of controller.

Highlights

  • 180-degree angle eases tight-case routing
  • SFF-8482 SAS interface connects to SATA 3.0 drives
  • 6 Gb/s link speed supports fast data transfer
  • Straight header design keeps cabling neat and secure

Specifications

No published specifications for this item yet.

Questions about this item

Should I pick the 180 degree angle or a straight header for my SFF-8482 SAS to SATA adapter?

The 180 degree angle suits tight drive bays where a straight header would press against the chassis, while a straight header works when the cable runs parallel to the motherboard.

What does the 6G figure mean for my U.2 to SATA3.0 connection?

It indicates a 6 Gbps SATA 3.0 link, so a connected SATA SSD or HDD will run at its full rated throughput rather than falling back to 3 Gbps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.