We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda SFF-8482 29-pin SAS to SATA 7-pin cable 70cm

Vszerda

Vszerda SFF-8482 SAS Cable 29P to SATA 7PIN 70cm

SKU CH-VVHW-JH3GV

Connects a 29-pin SAS drive to a SATA port using a 70 cm SFF-8482 cable

  • Connect SATA drives to SATA motherboards via SFF-8482 29-pin interface
  • Link SAS drives to SAS motherboards using the same 29-pin connector
  • 70 cm cable length provides flexible routing inside chassis
  • Direct 29-pin to single SATA 7-pin straight-through wiring
  • No active conversion — passive adapter requires matching SAS or SATA endpoints

Vszerda SFF-8482 SAS Cable 29P to SATA 7PIN

This 70cm cable adapts a single SFF-8482 29-pin SAS connector to a standard SATA 7-pin port. It enables a direct link between SAS interfaces and SATA drives or controllers in compatible systems. The straight connector design fits typical internal routing paths. It is built for internal storage cabling in workstations or servers.

Suits builders linking SAS backplanes to SATA drives

This cable works when the host side provides a true SAS controller with an SFF-8482 port and the target is a SATA hard disk or SSD. It will not function if the motherboard only has standard SATA ports without a SAS chipset. It also cannot connect a SAS drive to a plain SATA controller. Buyers needing to bridge a SAS drive to a SATA-only board should look elsewhere.

SFF-8482 29-pin SAS to single SATA 7-pin interface

The defining specification is the SFF-8482 29-pin connector on one end and a single SATA 7-pin connector on the other. This pin-out only passes signals when the host controller supports the SAS protocol. Without a SAS-capable chipset on the motherboard or RAID card, the link will not establish. Verify the host hardware provides native SAS support before purchase.

Highlights

  • Connect SATA drives to SATA motherboards via SFF-8482 29-pin interface
  • Link SAS drives to SAS motherboards using the same 29-pin connector
  • 70 cm cable length provides flexible routing inside chassis
  • Direct 29-pin to single SATA 7-pin straight-through wiring
  • No active conversion — passive adapter requires matching SAS or SATA endpoints

Specifications

No published specifications for this item yet.

Questions about this item

What connectors come with the Vszerda SFF-8482 cable and do I need anything else?

The cable has a 29-pin SFF-8482 SAS plug on one end and a single SATA 7-pin connector on the other. No extra parts are included.

How do I choose between the listed connection types for this adapter?

The adapter only works SATA-to-SATA or SAS-to-SAS. It cannot link a SAS drive to a standard SATA board, nor a SATA drive to a standard SAS board, unless the host or drive already has a SAS chipset.

What does the 70cm length mean when the cable is installed in a case?

At 70cm the cable reaches from a motherboard SATA or SAS port to a drive bay in most mid-tower builds, leaving enough slack for tidy routing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.