We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
SAS SFF-8482 29+15 pin to right-angle SATA 7 pin cable, 50 cm, ejector clip

Vszerda

Vszerda SFF-8482 SAS 29+15P to SATA 7P 90° 50CM cable

SKU CH-EKZX-7VP6J

A right-angle SATA connector with an ejector clip connects a SAS 29+15P port to SATA drives in tight server spaces

  • TypeSAS to SATA
  • Length18
  • Connector DetailMini Sas
  • Terminal GenderMale-to-Male
  • SpecificationsSAS to SATA
  • ShieldingHigh-speed transfer, space-saving design, ejector clip
  • High-speed SAS data transfer with 29+15 pin SFF-8482 connector
  • 90-degree SATA 7-pin right-angle plug fits tight server chassis
  • Ejector clip locks connection to prevent accidental disconnects
  • 50 cm length suits compact internal routing
  • Male-to-male design links SAS controller to SATA drives directly

Server SAS to SATA cable

This 50 cm cable links a SFF-8482 SAS 29+15 pin port to a right-angle SATA 7 pin drive. It is built for server administrators who need a compact internal connection between a SAS backplane or controller and standard SATA storage devices. The ejector clip locks the SAS plug in place during vibration or maintenance.

SAS interface practical limits

The cable carries the SAS electrical specification through a Mini SAS form factor, so maximum throughput depends on the controller and drive negotiation rather than the cable itself. Length is fixed at 50 cm, which suits typical 1U or 2U chassis but rules out runs that cross a full-height rack. The 90 degree SATA head eases routing in tight drive cages.

Connector gender and pin count

Both ends are male: the SAS side presents a 29+15 pin SFF-8482 plug with an ejector clip, while the SATA side uses a standard 7 pin right-angle connector. This gender and pin arrangement decides whether the cable matches your backplane and drive ports.

Highlights

  • High-speed SAS data transfer with 29+15 pin SFF-8482 connector
  • 90-degree SATA 7-pin right-angle plug fits tight server chassis
  • Ejector clip locks connection to prevent accidental disconnects
  • 50 cm length suits compact internal routing
  • Male-to-male design links SAS controller to SATA drives directly

Specifications

BrandST-JY
ModelSFF8482S29P15-ST7P90D
TypeSAS to SATA
Length18
Connector DetailMini Sas
Terminal GenderMale-to-Male
SpecificationsSAS to SATA
ShieldingHigh-speed transfer, space-saving design, ejector clip
FeaturesHigh-speed transfer, space-saving design, ejector clip

Questions about this item

The product is listed as a single SFF-8482 to SATA cable — is there a choice of lengths or connector styles?

This item is supplied as one 50 cm cable with a 90-degree SATA connector and an ejector clip; no other lengths or connector variants are listed.

What transfer speed will I actually see when this cable connects a SAS drive to a SATA controller?

The cable carries the SATA signal from the drive to the controller, so the link runs at the SATA device's native speed — commonly 6 Gb/s for current SATA SSDs and HDDs.

Does the SFF-8482 end conform to a specific SAS standard that caps the link rate?

The SFF-8482 connector is the standard 29+15 pin SAS drive interface; it passes the SATA protocol through to the controller without imposing an additional speed limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.