We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short grey cable with SFF-8088 and SFF-8644 connectors

Vszerda

Vszerda SFF-8088 to SFF-8644 SAS cable 0.5M

SKU CH-A3PC-Y7TFS

A 0.5 metre SAS cable links an SFF-8088 host port to an SFF-8644 high-density target with shock-resistant shielding

  • TypeSFF-8644
  • ColorSFF-8088 to SFF-8644
  • Length0.5
  • Connector Number32
  • Connector DetailSff-8088
  • Terminal GenderMale-to-Female
  • SFF-8644 HD connector enables 6Gb/s SAS links
  • SFF-8088 end connects to legacy Mini SAS controllers
  • 5 metre length suits tight server chassis
  • Shock-resistant shielding protects signal integrity during handling
  • 32-pin male-to-female design fits listed LSI and Adaptec RAID cards

Cable purpose and audience

This 0.5 metre external cable connects a Mini SAS HD SFF-8644 port to a standard Mini SAS SFF-8088 port. It suits administrators wiring external JBOD enclosures or tape libraries to RAID controllers that present the SFF-8644 interface. The short length keeps latency low inside a single rack.

Who should consider alternatives

Builds that need internal backplane connections rather than external links cannot use this cable. Installations requiring longer runs between racks need a different length. Systems limited to 3 Gb/s SAS endpoints will not benefit from the 6 Gb/s rated shield.

Deciding specification

The cable carries a 6 Gb/s SAS-2.1 rating across the SFF-8644 to SFF-8088 interface, so the controller and enclosure must both support that signalling rate for full performance.

Highlights

  • SFF-8644 HD connector enables 6Gb/s SAS links
  • SFF-8088 end connects to legacy Mini SAS controllers
  • 5 metre length suits tight server chassis
  • Shock-resistant shielding protects signal integrity during handling
  • 32-pin male-to-female design fits listed LSI and Adaptec RAID cards

Specifications

Brandchenyang
ModelCY-SF-067-0.5M
TypeSFF-8644
ColorSFF-8088 to SFF-8644
Length0.5
Connector Number32
Connector DetailSff-8088
Terminal GenderMale-to-Female
Speed3 gigabits_per_second
SpecificationsSFF-8644
Shieldingshock-resistant
Featuresshock-resistant

Questions about this item

What clearance does the 0.5 m SFF-8088 to SFF-8644 cable need to route cleanly?

The half-metre length and shock-resistant jacket suit tight server bays; allow a gentle bend radius so the 32-pin connectors seat without strain.

Which side plugs into the controller and which into the backplane, and what is the common mistake?

The male SFF-8088 end goes to the external controller port, the female SFF-8644 end to the backplane; reversing them leaves the latch tabs inaccessible.

When should the cable be inspected or replaced in a RAID array?

Check the latch tabs and jacket after any chassis service; replace if the 6 Gb/s link drops or the shock-resistant sleeve shows cuts.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.