We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 1-metre SAS cable with SFF-8088 connectors at both ends

Vszerda

Vszerda SFF-8088 to SFF-8088 SAS cable 1m 6Gbps 26Pin 100-Ohm

SKU CH-FXNP-429C1

Connects external Mini-SAS devices at up to 6 Gbps over a 1-meter shielded 100-ohm twinaxial cable with 26-pin SFF-8088 male connectors on both ends

  • TypeSAS
  • Color1PC
  • Length1
  • Connector Number26
  • Connector DetailSff-8088 to Sff-8088
  • Terminal GenderMale-to-Male
  • Supports 6Gbps SAS 2.0 for high-throughput storage
  • AWG26 twinaxial 8-pair wiring with 100-Ohm impedance minimises signal skew
  • Male-to-Male SFF-8088 connectors ensure secure Mini-SAS device links
  • 1-metre length fits rack-to-rack deployments in RAID arrays
  • Compatible with SAS and SATA devices in servers and DAS

Vszerda SFF-8088 SAS Cable 1m 6Gbps

This Vszerda cable is a male-to-male SFF-8088 assembly rated for 6Gbps SAS 2.0 traffic with 100-ohm impedance. It connects external RAID controllers to DAS enclosures or server backplanes over a one-metre reach. The 26-pin Mini-SAS HD connectors lock securely for rack-to-rack deployments. It ships new and meets SFF-8088 industry standards for signal integrity.

For external storage links in servers

The cable suits administrators wiring SAS or SATA drives in external chassis, JBODs, or tape libraries where a short, shielded run is required. It does not serve internal backplane routing or direct-attach PCIe cabling. Installations needing longer reaches or different connector keying must select another part.

6Gbps SAS 2.0 over SFF-8088 decides fit

The single specification that determines compatibility is the 6Gbps SAS 2.0 rating on the SFF-8088 interface. Verify that both host and target ports use this exact connector and protocol generation before ordering. The 100-ohm twinax construction supports the stated speed with minimal skew.

Highlights

  • Supports 6Gbps SAS 2.0 for high-throughput storage
  • AWG26 twinaxial 8-pair wiring with 100-Ohm impedance minimises signal skew
  • Male-to-Male SFF-8088 connectors ensure secure Mini-SAS device links
  • 1-metre length fits rack-to-rack deployments in RAID arrays
  • Compatible with SAS and SATA devices in servers and DAS

Specifications

TypeSAS
Color1PC
Length1
Connector Number26
Connector DetailSff-8088 to Sff-8088
Terminal GenderMale-to-Male
Speed6 gigabits_per_second
SpecificationsSAS
ShieldingData Transfer
FeaturesData Transfer

Questions about this item

How does the 6 Gbps rating translate to real-world throughput inside a server?

The cable supports the SAS 2.0 protocol at up to 6 Gbps per lane, so actual throughput depends on the controller and drives but will not exceed that lane speed.

What does the SFF-8088 interface cap in practice?

SFF-8088 connectors carry four lanes of SAS 2.0, limiting the link to 6 Gbps per lane and maintaining backward compatibility with 3 Gbps devices.

What clearance or rack space does the 1-metre assembly need to fit?

At 1 metre (3.3 ft) long with standard Mini-SAS HD plugs, it fits typical rack-to-rack runs between servers and external DAS enclosures.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.