Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Vszerda
Connects Mini SAS SFF-8088 to SAS 8087 with a right-angle design for tight server spaces
This 50cm adapter cable connects a Mini SAS SFF-8088 female port to a right-angle SAS 8087 male connector, enabling high-speed data transfer between compatible server components. It is built for IT professionals who need reliable SAS connectivity inside dense chassis where straight connectors would not fit. The secure locking mechanism keeps the link stable under vibration. The short length reduces signal loss and cable clutter in rack environments.
The right-angle SAS 8087 end replaces a straight connector when rear clearance is limited, letting the cable run parallel to the backplane or motherboard instead of projecting outward. This matters when multiple cables sit side by side or when a chassis door must close without pressing on the latch. If your current straight cable blocks airflow or prevents adjacent ports from being used, the angled design clears that obstruction.
The cable requires a free SFF-8088 female port on one side and a SAS 8087 male header on the other; both must be present in your server or storage enclosure. No external power or active electronics are involved, so it adds no load to the power budget. The 18-inch length suits connections within the same chassis or between adjacent rack units, but will not reach across full-depth cabinets. Builders needing longer runs or a different gender combination will need a separate cable.
| Brand | ST-JY |
|---|---|
| Model | SFF8088F-87R |
| Type | SAS |
| Length | 18 |
| Connector Detail | Mini Sas |
| Terminal Gender | Male-to-Female |
| Specifications | SAS |
| Shielding | High-speed transfer, secure lock |
| Features | High-speed transfer, secure lock |
The right-angle SAS 8087 connector projects sideways, so allow roughly the cable diameter plus the latch height behind the backplane; the 50 cm length gives slack to route without sharp bends.
Insert the SFF-8088 female end onto the external Mini SAS cable until the latch clicks, then seat the right-angle SAS 8087 male end into the controller port; reversing the order can stress the latch.
Check the latch each time you reseat the cable; if the spring tab no longer holds the plug firmly under vibration, replace the adapter to avoid intermittent SAS link errors.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?