We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two short blue cables with wide 36-pin connectors on each end

Vszerda

Vszerda SFF-8087 to SFF-8087 Mini SAS Cable 6Gbps 0.5m 1.6ft 2 Pack

SKU CH-9BCF-AB660

A 0.5-metre SFF-8087 to SFF-8087 Mini SAS cable pair rated for 6 Gbps data transfer with 100-ohm shielded twinax construction

  • TypeInternal Mini SAS HD Cable
  • Length0.5
  • Connector DetailSff-8087 to Sff-8087
  • Terminal GenderMale-to-Male
  • Speed6 gigabits_per_second
  • FeaturesData Transfer
  • 6 Gbps bandwidth supports SAS and SATA 3.0 devices
  • 100-ohm Twinax copper with full EMI shielding cuts crosstalk
  • 5 m length keeps server rack routing tidy
  • Gold-plated contacts and strain relief rated for 24/7 operation
  • Two cables per pack for dual-port controller setups

Server Storage Connectivity

This 0.5-metre Mini SAS cable uses dual SFF-8087 male connectors to link RAID controllers, HBAs and server backplanes. It supports SAS 6.0Gbps and SATA 3.0 protocols for enterprise storage arrays. The two-pack suits redundant or multi-channel deployments.

Signal Integrity

A 100-ohm Twinax construction with full EMI shielding reduces crosstalk in dense chassis. Gold-plated contacts and reinforced strain relief withstand continuous 24/7 operation. The short 1.6ft length keeps internal routing tidy and airflow unimpeded.

Connector Compatibility

The 36-position SFF-8087 interface fits only matching Mini SAS ports; it will not plug into standard SATA or eSATA headers. Buyers needing direct drive-to-motherboard SATA links or longer runs must choose a different cable assembly.

Highlights

  • 6 Gbps bandwidth supports SAS and SATA 3.0 devices
  • 100-ohm Twinax copper with full EMI shielding cuts crosstalk
  • 5 m length keeps server rack routing tidy
  • Gold-plated contacts and strain relief rated for 24/7 operation
  • Two cables per pack for dual-port controller setups

Specifications

Brand10Gtek
ModelCAB-8087-P0.5M-2pc
TypeInternal Mini SAS HD Cable
Length0.5
Connector DetailSff-8087 to Sff-8087
Terminal GenderMale-to-Male
Speed6 gigabits_per_second
FeaturesData Transfer

Questions about this item

How do I install the SFF-8087 connectors onto a RAID card or backplane, and what step is often missed?

Align the keyed SFF-8087 male plugs with the female ports on the RAID controller or backplane, push straight in until the latch clicks, and secure the side screws if present; the step often missed is verifying both latches are fully engaged before powering on.

What maintenance or replacement will the cable need later?

The gold-plated contacts and 100-ohm twinax construction are rated for continuous 24/7 operation; no scheduled maintenance is required, but inspect for bent pins or jacket damage if the server is moved, and replace the cable if errors appear.

What limit appears first under sustained 6Gbps throughput?

The 0.5-metre AWG30 twinax assembly is specified for up to 6.0Gbps with a temperature range of -20 to 80°C; sustained heavy workloads will hit the cable’s thermal limit before signal degradation occurs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.