We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue SFF-8087 to SFF-8087 SAS cable with black connectors, .8m length

Vszerda

Vszerda SFF-8087 to SFF-8087 6G SAS cable 0.8m (2.6ft) 100-Ohm

SKU CH-CAHX-Y97XQ

Connects SAS backplanes or RAID cards with SFF-8087 ports at up to 6Gbps over a 2.6ft, 100-Ohm link

  • Connects internal SAS ports with SFF-8087 connectors
  • 100-Ohm impedance maintains signal integrity
  • Supports up to 6Gbps data transfer rates
  • Hot-swap ready for SATA drive compatibility
  • 8m length fits compact server chassis

Internal SAS SFF-8087 Cable

This 0.8m internal cable connects two SFF-8087 ports for 6Gbps SAS or SATA links inside servers and storage arrays. The 100-Ohm impedance supports reliable signal integrity across the short run. It is built new for direct backplane-to-controller or RAID-card wiring.

Installers wiring internal hot-swap bays

Technicians fitting internal drive cages or RAID controllers with SFF-8087 headers will find the length and connector match convenient. Builders needing external ports, different internal connectors or longer runs must choose a different cable. The fixed 2.6ft length limits placement flexibility in larger enclosures.

100-Ohm impedance at 6Gbps

The cable is specified for 100-Ohm differential impedance and up to 6Gbps data rates, the single figure that determines whether it matches your controller and backplane signalling requirements..verify the host and target both use SFF-8087 before ordering.

Highlights

  • Connects internal SAS ports with SFF-8087 connectors
  • 100-Ohm impedance maintains signal integrity
  • Supports up to 6Gbps data transfer rates
  • Hot-swap ready for SATA drive compatibility
  • 8m length fits compact server chassis

Specifications

No published specifications for this item yet.

Questions about this item

What does the 6Gbps SAS rating mean for real-world throughput?

The cable supports SAS signalling up to 6Gbps per lane; actual throughput depends on the connected controller and drives, but the 100-Ohm impedance preserves signal integrity at that rate.

Will the SFF-8087 connectors fit my server backplane and RAID card?

Both ends use the SFF-8087 36-pin internal Mini SAS connector, which is the standard internal interface on most server backplanes and RAID cards.

How do I install it and what is the common mistake?

Align the keyed SFF-8087 plugs and press firmly until the latch clicks; the frequent error is leaving the latch unlatched, which causes intermittent connections.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.