We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue SFF-8087 male connector splitting to four black SATA female connectors with woven mesh sleeve

Vszerda

Vszerda SFF-8087 to 4 SATA Forward Breakout Cable 1.64ft

SKU CH-MSKP-FHE62

Connects an SFF-8087 controller to four SATA drives at 6Gbps each in a 1.64ft blue cable with latch locking and port markers

  • Connect RAID controller to four SATA drives via SFF-8087
  • Up to 6 Gbps per SATA port for fast throughput
  • 64 ft length keeps internal routing tidy
  • Latch-locking connectors on both ends secure the link
  • Blue woven mesh sleeve protects half the cable run

SFF-8087 to 4 SATA breakout

This cable connects a RAID or PCIe controller with an SFF-8087 port to four SATA drives. It suits builders adding direct-attached storage to a server or workstation. The forward breakout design links one controller port to multiple drive targets.

Build quality and daily handling

A woven mesh sheath covers half the cable length for protected routing inside a chassis. Latch-locking connectors on both the SFF-8087 male plug and the four SATA female ports resist accidental disconnection. P1 to P4 markers identify each channel after installation. Blue cable with black sleeving aids visual tracing.

6 Gbps per SATA port

Each of the four SATA connections supports up to 6 Gbps data transfer. The link spans two PCIe 2.0 x8 lanes with compatible host bus adapters. Cable length is 1.64 feet. This part does not suit builds needing longer reach or external eSATA connections.

Highlights

  • Connect RAID controller to four SATA drives via SFF-8087
  • Up to 6 Gbps per SATA port for fast throughput
  • 64 ft length keeps internal routing tidy
  • Latch-locking connectors on both ends secure the link
  • Blue woven mesh sleeve protects half the cable run

Specifications

No published specifications for this item yet.

Questions about this item

What data rate does the SFF-8087 interface cap each SATA drive at?

The SFF-8087 connector supports up to 6Gbps per SATA port, matching the SATA 6Gbps specification.

What clearance does the 1.64ft cable with woven mesh sheath need inside a case?

The 1.64ft length and half-length mesh sleeve suit tight server chassis; allow room for the SFF-8087 latch and four SATA latches.

How do I install the SFF-8087 to 4 SATA breakout cable and which step is often missed?

Plug the SFF-8087 male end into the controller until the latch clicks, then attach each SATA female end to drives; verify P1–P4 markers match the array order.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.