We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Mini SAS SFF-8087 male connector fans out to four SATA female connectors on 1 m cable

Vszerda

Vszerda SFF-8087 to 4×SATA 6 Gbps cable 1 m

SKU CH-K7DH-DY9SW

A 1 m SFF-8087 to 4×SATA fan-out cable supporting 6 Gbps per lane for RAID controllers and servers

  • TypeInternal Mini SAS HD Cable
  • Color1PC
  • Length1
  • Connector Number36
  • Connector DetailSff-8087 to 4x Sata
  • Terminal GenderMale-to-Male
  • Connects one SAS controller to four SATA drives via SFF-8087 fan-out
  • 6 Gbps per lane supports high-throughput storage workloads
  • 1 m length fits typical server and workstation chassis
  • Backward compatible with earlier SAS and SATA generations
  • AWG30 twinaxial 8-pair construction meets 100 Ohm impedance spec

Vszerda SFF-8087 to 4×SATA breakout cable

This 1 m cable connects a single SFF-8087 port on a SAS controller or RAID card to four SATA hard drives or SSDs. It is built for server and storage-enclosure installations that need multiple drive links from one controller lane. The male-to-male fan-out design suits 36-pin Mini MultiLane interfaces in direct-attached or rackmount systems.

Four SATA links from one controller port

The fan-out wiring turns one 4-lane SAS connection into four separate 6 Gbps SATA channels, letting you populate four drive bays without extra controller ports. AWG30 twinaxial 8-pair construction with 100 Ohm impedance and crossover wiring reduces skew and meets SAS 1.1 and SAS 2 specifications for reliable throughput in high-density arrays.

Simple internal routing with standard connectors

The 36-pin SFF-8087 plug seats directly into compatible HBA or RAID cards, while the four 7-pin SATA receptacles accept standard drive cables. Backward compatibility with earlier SAS and SATA generations eases integration into existing chassis. Installers should verify that the controller supports SATA targets on SAS lanes and that drive bay spacing matches the 1 m reach.

Highlights

  • Connects one SAS controller to four SATA drives via SFF-8087 fan-out
  • 6 Gbps per lane supports high-throughput storage workloads
  • 1 m length fits typical server and workstation chassis
  • Backward compatible with earlier SAS and SATA generations
  • AWG30 twinaxial 8-pair construction meets 100 Ohm impedance spec

Specifications

Brand10Gtek
TypeInternal Mini SAS HD Cable
Color1PC
Length1
Connector Number36
Connector DetailSff-8087 to 4x Sata
Terminal GenderMale-to-Male
Speed6 gigabytes_per_second
SpecificationsInternal Mini SAS HD Cable
ShieldingData Transfer
FeaturesData Transfer

Questions about this item

How long does the SFF-8087 connector last with repeated insertions?

The connector uses a standard 36-pin SFF-8087 interface rated for typical server mating cycles; avoid unnecessary reconnections to preserve signal integrity.

What limits sustained throughput on this 6 Gbps cable?

Each of the four lanes runs at 6 Gbps, so the combined limit is the controller's lane count and the SATA device's own maximum transfer rate.

Does the 1 m cable generate noticeable heat inside a server chassis?

The AWG30 twinaxial construction carries 6 Gbps signals with low skew, so passive operation adds negligible heat even in densely packed enclosures.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.