We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Vszerda SFF-8087 internal Mini SAS cable, 1.6 m, 36-pin male-to-male, braided mesh jacket

Vszerda

Vszerda SFF-8087 Internal Mini SAS Cable 1.6m 36-pin 6G

SKU CH-EM01-K73YR

Connects RAID cards or backplanes to SAS and SATA drives at 6 Gbps over 1.6 m with locking 36-pin SFF-8087 connectors

  • TypeInternal Mini SAS HD Cable
  • Color1PC
  • Length1.6
  • Connector Number36
  • Terminal GenderMale-to-Male
  • Speed6 gigabits_per_second
  • 6 Gbps data rate for SAS or SATA storage
  • 36-pin SFF-8087 male connectors on both ends
  • Braided mesh jacket with individual lane shielding
  • Tape strain relief prevents rigidity at connectors
  • 6 m length fits server backplane to RAID card runs

Vszerda SFF-8087 Internal Mini SAS Cable

This new Vszerda SFF-8087 Internal Mini SAS Cable is a 1.6m Male-to-Male assembly rated for 6 Gbps data transfer. It uses a 36-pin connector on each end and is built for server and storage environments. The 100-Ohm shielded ribbon construction supports hot-swap SATA and SAS drive bays.

Suited for RAID cards and backplanes using SFF-8087

The cable fits internal SAS or SATA storage systems, HBA interfaces and direct-attached storage where a 36-pin SFF-8087 link is required. Builders needing a different pin count, an external connector style, or a longer reach for the same internal run should look at other assemblies.

36-pin SFF-8087 Male-to-Male at 6 Gbps

The single specification that decides fit is the 36-pin SFF-8087 Male-to-Male interface operating at 6 Gbps. If your backplane or RAID controller calls for this exact connector and speed, the cable matches; otherwise it will not connect.

Highlights

  • 6 Gbps data rate for SAS or SATA storage
  • 36-pin SFF-8087 male connectors on both ends
  • Braided mesh jacket with individual lane shielding
  • Tape strain relief prevents rigidity at connectors
  • 6 m length fits server backplane to RAID card runs

Specifications

Brand10Gtek
TypeInternal Mini SAS HD Cable
Color1PC
Length1.6
Connector Number36
Terminal GenderMale-to-Male
Speed6 gigabits_per_second
SpecificationsInternal Mini SAS HD Cable
ShieldingData Transfer
FeaturesData Transfer

Questions about this item

Will the SFF-8087 connectors or the braided jacket need replacement after repeated hot-swap cycles?

The industrial-grade braided mesh jacket and stainless steel latch are built for secure connections in server RAID systems and hot-swappable drive bays.

Does the 1.6 ft length or 100-ohm impedance limit signal integrity on a fully loaded 6 Gbps SAS backplane?

The cable is specified for 6 Gbps transfers over four lanes with 100-ohm impedance, matching the SAS 4-lane design used in server and storage applications.

How much heat does the individually shielded ribbon cable generate during all-day RAID array rebuilds?

The passive copper assembly has no active components; heat is limited to normal conductor loss at 6 Gbps and the braided jacket aids dissipation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.