Vszerda
Vszerda SF-084-8612-XY SFF-8612 to SFF-8639 adapter with SATA power
Converts an OCuLink SFF-8612 port to an SFF-8639 U.2/U.3 NVME SSD slot with SATA power
- TypeSerial
- Connector DetailOculink Sff-8612 Female
- Terminal GenderFemale-to-Female
- ConductorCopper
- FeaturesData Transfer
- Connects OCuLink SFF-8612 to U.2/U.3 NVMe drives via SFF-8639
- Powers the adapter with standard SATA 5V and 12V supply
- Transmits PCIe 4.0 and 5.0 signals at up to 64 Gbps
- Works driver-free and transparent to the operating system
- Vertical connector fits tight spaces around the female port
Connector Conversion for U.2 and U.3 Drives
This adapter adds an OCuLink SFF-8612 female port to an existing SFF-8639 U.2 or U.3 interface. It includes a SATA power connector supplying 5V and 12V for drive operation. The card is designed for motherboards or backplanes with a compatible U.2/U.3 slot.
Suits Builders Adapting Existing U.2/U.3 Slots
It fits systems where a U.2 or U.3 port is present but an OCuLink SFF-8612 connection is required. Builders needing to connect a drive directly to an M.2 slot, a standard SATA port, or a PCIe slot without a U.2/U.3 interface should look elsewhere.
Passive PCIe 4.0 and 5.0 Signal Path
The adapter transmits PCI Express 4.0 and 5.0 signals using the NVMe protocol at up to 64Gbps. It supports NVM Express 1.2 and operates transparently without drivers. The vertical connector orientation eases installation where space around the port is limited.
Highlights
- Connects OCuLink SFF-8612 to U.2/U.3 NVMe drives via SFF-8639
- Powers the adapter with standard SATA 5V and 12V supply
- Transmits PCIe 4.0 and 5.0 signals at up to 64 Gbps
- Works driver-free and transparent to the operating system
- Vertical connector fits tight spaces around the female port
Specifications
| Brand | xiwai |
|---|---|
| Model | SF-084-8612-XY |
| Type | Serial |
| Connector Detail | Oculink Sff-8612 Female |
| Terminal Gender | Female-to-Female |
| Conductor | Copper |
| Features | Data Transfer |
Questions about this item
How do I install the SFF-8612 to SFF-8639 adapter and connect the SATA power cable?
Plug the OCuLink SFF-8612 female connector into the host port, attach the SFF-8639 U.2/U.3 female side to the drive, then connect the SATA power cable to a 5V+12V supply from the mainboard. The vertical SFF-8612 connector fits tight spaces. No drivers are required.
What maintenance or replacement will the adapter need over time?
The adapter has no moving parts and requires no scheduled maintenance. If the copper conductors or SATA power cable show physical damage or intermittent contact, replace the unit.
What is the first limit I will hit under sustained PCIe 5.0 NVMe loads?
The link tops out at 64Gbps using the NVMe 1.2 protocol, so sustained throughput cannot exceed that ceiling regardless of drive capability.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114364BTC
In stock
