We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black active cable with SFF-8611 and SFF-8654 connectors 50cm

Vszerda

Vszerda SF-060 OCuLink SFF-8611 to SFF-8654 Active Cable 50cm

SKU CH-GG38-DFQ1J

Active OCuLink cable connects a SFF-8611 controller to a SFF-8654 backplane at up to 8Gbps over 50cm with locking latches

  • ColorBlack
  • ConductorCopper
  • Connect backplane to controller via SFF-8611 to SFF-8654
  • 50cm length fits tight server chassis
  • Active latch secures connection under vibration
  • Copper conductor supports 8Gbps data rate
  • Requires free OCuLink interface on host

Vszerda SF-060 OCuLink Active Cable 50cm

This Vszerda SF-060 cable links an OCuLink SFF-8611 4i host port to a Slimline SFF-8654 device connector. It carries PCIe data at up to 8Gbps over a 50cm copper run. An active latch secures each end against vibration. The assembly is built for internal chassis routing.

Builders connecting backplanes to controllers

The cable suits integrators wiring a backplane with SFF-8654 ports to a RAID card or motherboard with an OCuLink SFF-8611 4i interface. It is not for external drive enclosures or legacy SATA and eSATA cabling. Systems without a free OCuLink header cannot use this link.

8Gbps PCIe over copper with active latching

The 8Gbps signalling rate decides whether the link saturates your SSD or RAID array. Copper conductors and the active latch maintain signal integrity across the 50cm span. Verify your controller and backplane both specify SFF-8611 and SFF-8654 before ordering.

Highlights

  • Connect backplane to controller via SFF-8611 to SFF-8654
  • 50cm length fits tight server chassis
  • Active latch secures connection under vibration
  • Copper conductor supports 8Gbps data rate
  • Requires free OCuLink interface on host

Specifications

BrandVszerda
ModelSF-060
ColorBlack
ConductorCopper

Questions about this item

Which controller port do I need free to plug in the SFF-8611 end?

You need a free OCuLink SFF-8611 4i port on your controller or motherboard.

Will this cable work with a legacy SATA backplane I already own?

No, the SFF-8654 connector is not compatible with standard SATA or eSATA ports.

How do I confirm the active latch is engaged after installation?

Push each connector until the latch clicks audibly and the cable resists a gentle pull.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.