We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda SF-014-DN-HX OCuLink SFF-8611 4i Active Cable 80cm Down Angled 90 Degree

SKU CH-GDVA-XETGZ

Active OCuLink SFF-8611 cable carries PCIe 4.0 at 64 Gbps with a 90-degree down-angled connector for tight spaces

  • ColorBlack
  • PCIe 4.0 support at 64 Gbps for fast eGPU and SSD links
  • 90-degree down-angled connectors fit tight spaces around motherboard ports
  • Active latch locks securely to mating OCuLink SFF-8611 ports
  • 80 cm length gives flexible routing inside chassis
  • Male-to-male SFF-8611 4i connects backplane directly to controller

Internal PCIe 4.0 OCuLink cable

This Vszerda SF-014-DN-HX active cable carries PCI Express 4.0 signals over an OCuLink SFF-8611 4i link at up to 64Gbps. The 80cm black cable connects a backplane or controller that both present female OCuLink ports. A down-angled 90-degree connector eases routing where straight plugs would foul adjacent components.

Builders linking internal PCIe devices

Suits anyone joining an OCuLink-equipped backplane, SSD enclosure or eGPU dock to a host adapter inside the same chassis. The active-latch lock secures the connection against vibration. Not for users who need a straight connector, a longer reach than 80cm, or a cable that converts to U.2, U.3 or other interfaces.

Verify port orientation and clearance

Confirm both ends expose a female OCuLink SFF-8611 receptacle with enough room for the 90-degree down angle to seat fully. Check that the host system provides a free OCuLink interface and that the 80cm length spans the intended routing path without strain.

Highlights

  • PCIe 4.0 support at 64 Gbps for fast eGPU and SSD links
  • 90-degree down-angled connectors fit tight spaces around motherboard ports
  • Active latch locks securely to mating OCuLink SFF-8611 ports
  • 80 cm length gives flexible routing inside chassis
  • Male-to-male SFF-8611 4i connects backplane directly to controller

Specifications

BrandVszerda
ModelSF-014-DN-HX
ColorBlack

Questions about this item

What connector must my motherboard or controller already provide for this SFF-8611 4i cable to plug in?

A free OCuLink SFF-8611 female port is required on the host side.

Will this 80 cm active cable carry PCIe 4.0 signals from an older PCIe 3.0 backplane without signal loss?

Yes, the cable transmits PCIe 4.0 and is backward compatible with PCIe 3.0 devices.

How can I confirm the link is running at the full 64 Gbps after I connect an eGPU or SSD?

Check the negotiated link speed in your OS device manager or GPU-Z; it should show PCIe 4.0 x4.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.