We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Vszerda

Vszerda SF-004-1.0M Mini SAS SFF-8087 to 4 SATA 7pin 6Gbps 100cm

SKU CH-57AR-XZ6E1

Connects four SATA drives to a Mini SAS SFF-8087 controller at 6 Gbps over 100 cm

  • TypeMini-SAS
  • ColorCopper
  • Connector DetailSff-8087 & Sata
  • Terminal GenderMale-to-Female
  • Speed6 gigabits_per_second
  • ConductorCopper
  • Connect four SATA drives to one Mini SAS SFF-8087 port
  • 6 Gbps transfer speed supports fast RAID arrays
  • 100 cm length fits full-tower server chassis
  • Copper conductors maintain signal integrity at 6 Gbps
  • Compliant with SAS 2.1 specification for reliable operation

Vszerda SF-004-1.0M Mini SAS Cable

This Vszerda SF-004-1.0M cable connects four SATA hard disks to a single Mini SAS SFF-8087 host port. It is built for internal server and RAID configurations that require a 1-to-4 breakout from a controller. The copper conductors carry data at 6Gbps across a 100cm length.

SFF-8087 to four SATA 7-pin breakout

The decisive specification is the connector pairing: one Mini SAS SFF-8087 male plug on the host side and four SATA 7-pin female receptacles on the drive side. This exact layout lets a single controller port address four separate SATA targets without an expander backplane.

Copper construction meets SAS 2.1 standard

The cable uses copper conductors specified to the SAS 2.1 standard for 6Gbps operation. No additional software, drivers or power adapters are included in the bundle; the accessory change is purely the physical breakout that consolidates four drive connections into one controller slot.

Highlights

  • Connect four SATA drives to one Mini SAS SFF-8087 port
  • 6 Gbps transfer speed supports fast RAID arrays
  • 100 cm length fits full-tower server chassis
  • Copper conductors maintain signal integrity at 6 Gbps
  • Compliant with SAS 2.1 specification for reliable operation

Specifications

BrandVszerda
ModelSF-004-1.0M
TypeMini-SAS
ColorCopper
Connector DetailSff-8087 & Sata
Terminal GenderMale-to-Female
Speed6 gigabits_per_second
ConductorCopper
Features1-to-4

Questions about this item

Will the 6 Gbps rating let each of my four SATA drives run at full SATA III speed when plugged into this cable?

Yes — the SFF-8087 host connector follows the SAS 2.1 standard and delivers 6 Gbps per lane, so every attached SATA 7-pin drive can operate at its native 6 Gbps rate.

Does the SFF-8087 connector limit me to SAS 2.1 speeds even if my controller supports SAS 3.0?

The cable is built to the SAS 2.1 specification, so its maximum throughput is 6 Gbps per lane regardless of the controller generation.

How much room do I need inside the chassis to route the 100 cm cable from the controller to four drive bays?

The 1.0 metre length gives enough slack to reach widely spaced bays in a typical server or workstation chassis.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.