We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White plastic PLC splitter module with SC connectors and 0.9 mm yellow fiber tails

Vszerda

Vszerda SC 1x2 PLC Splitter 0.9mm G657A1 Singlemode 1m

SKU CH-M52W-ZVEBZ

A 1x2 PLC splitter divides one singlemode fibre into two with 3.5 dB insertion loss and 50 dB return loss

  • TypeFiber Optic
  • Connector NumberSC
  • Uniform 1x2 signal split with G657A1 singlemode fibre
  • Low 3.5 dB insertion loss and 50 dB return loss
  • Wavelength-insensitive loss across 1310 nm and 1550 nm
  • Stainless-steel housing protects splitter from -40 °C to 85 °C
  • SC connectors on 0.9 mm pigtail for home and project wiring

1×2 PLC Fiber Splitter

The Vszerda SC 1×2 PLC splitter divides a single singlemode signal into two equal paths for home wiring, engineering projects or fibre LAN installations. It uses G657A1 fibre with a 0.9 mm diameter and SC connectors on a one-metre pigtail. The device is supplied new and ready for immediate deployment.

Split ratio and loss limits

A 1×2 planar lightwave circuit provides uniform spectral distribution across the 1310 nm and 1550 nm windows. Typical insertion loss is 3.5 dB and return loss reaches 50 dB. The component operates from −40 °C to 85 °C, so extreme ambient temperatures do not degrade the split performance.

Singlemode G657A1 fibre

The splitter is built on G657A1 singlemode fibre, which determines bend tolerance and compatibility with standard singlemode infrastructure. If the installation requires multimode fibre or a different split ratio, this unit will not suit the application.

Highlights

  • Uniform 1x2 signal split with G657A1 singlemode fibre
  • Low 3.5 dB insertion loss and 50 dB return loss
  • Wavelength-insensitive loss across 1310 nm and 1550 nm
  • Stainless-steel housing protects splitter from -40 °C to 85 °C
  • SC connectors on 0.9 mm pigtail for home and project wiring

Specifications

BrandPoyiccot
TypeFiber Optic
Connector NumberSC

Questions about this item

Should I choose the 1m or 3.3ft length for my installation?

Both figures describe the same physical length; 3.3ft is the imperial equivalent of 1m, so either value refers to the identical 1-metre pigtail.

What does the 3.5dB insertion loss mean for my link budget?

The splitter introduces a maximum of 3.5dB loss per output port at 1310/1550nm, so each branch loses that amount before reaching the next component.

Is the SC connector compatible with standard singlemode patch panels?

Yes, the SC/UPC singlemode connector mates with any standard SC singlemode adapter and is rated for 50dB return loss.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.